[PATCH v3 11/12] arm64: dts: qcom: sm6350-lena: Add PM6150L thermals
From: erebion
Date: Sun Nov 01 2026 - 18:32:41 EST
Configure the thermals for the PA_THERM1, MSM_THERM, PA_THERM0,
RFC_CAM_THERM, CAM_FLASH_THERM and QUIET_THERM thermistors connected to
PM6150L.
Due to hardware constraints we can only register 4 zones with
pm6150l_adc_tm, the other 2 we can register via generic-adc-thermal.
The trip points can really only be considered as placeholders, more
configuration with cooling etc. can be added later.
Signed-off-by: erebion <erebion@xxxxxxxxxx>
---
.../dts/qcom/sm6350-sony-xperia-lena-pdx213.dts | 202 +++++++++++++++++++++
1 file changed, 202 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index 4e9707712a651..487ef75f2f1de 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -12,7 +12,9 @@
#define PMK8350_SID 6
#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -70,6 +72,20 @@ lcdb_dummy: regulator-lcdb-dummy {
regulator-boot-on;
};
+ msm_therm_sensor: thermal-sensor-msm {
+ compatible = "generic-adc-thermal";
+ #thermal-sensor-cells = <0>;
+ io-channels = <&pm6150l_adc ADC5_AMUX_THM2_100K_PU>;
+ io-channel-names = "sensor-channel";
+ };
+
+ rear_cam_sensor: thermal-sensor-rear-cam {
+ compatible = "generic-adc-thermal";
+ #thermal-sensor-cells = <0>;
+ io-channels = <&pm6150l_adc ADC5_GPIO6_100K_PU>;
+ io-channel-names = "sensor-channel";
+ };
+
touch_en_vreg: regulator-touch-en {
compatible = "regulator-fixed";
regulator-name = "touch_en_vreg";
@@ -115,6 +131,99 @@ active-config0 {
};
};
+ pa0-thermal {
+ thermal-sensors = <&pm6150l_adc_tm 1>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ pa1-thermal {
+ thermal-sensors = <&pm6150l_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ quiet-thermal {
+ thermal-sensors = <&pm6150l_adc_tm 3>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ rear-cam-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&rear_cam_sensor>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ rfc-flash-thermal {
+ thermal-sensors = <&pm6150l_adc_tm 2>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ sdm-skin-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&msm_therm_sensor>;
+
+ trips {
+ trip0 {
+ temperature = <45000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <55000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ xo-thermal {
+ thermal-sensors = <&pmk8350_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
};
};
@@ -392,6 +501,99 @@ &mpss {
status = "okay";
};
+&pm6150l_gpios {
+ pm6150l_adc_default: adc-default-state {
+ pins = "gpio6", "gpio7", "gpio10";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ bias-high-impedance;
+ };
+};
+
+&pm6150l_adc {
+ pinctrl-0 = <&pm6150l_adc_default>;
+ pinctrl-names = "default";
+
+ channel@4d {
+ reg = <ADC5_AMUX_THM1_100K_PU>;
+ label = "pa_therm1";
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ qcom,ratiometric;
+ };
+
+ channel@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ label = "msm_therm";
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ qcom,ratiometric;
+ };
+
+ channel@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ label = "pa_therm0";
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ qcom,ratiometric;
+ };
+
+ channel@53 {
+ reg = <ADC5_GPIO2_100K_PU>;
+ label = "rear_cam_therm";
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ qcom,ratiometric;
+ };
+
+ channel@54 {
+ reg = <ADC5_GPIO3_100K_PU>;
+ label = "rear_cam_flash_therm";
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ qcom,ratiometric;
+ };
+
+ channel@55 {
+ reg = <ADC5_GPIO4_100K_PU>;
+ label = "quiet_therm";
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ qcom,ratiometric;
+ };
+};
+
+&pm6150l_adc_tm {
+ status = "okay";
+
+ pa-therm1@0 {
+ reg = <0>;
+ io-channels = <&pm6150l_adc ADC5_AMUX_THM1_100K_PU>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,ratiometric;
+ };
+
+ pa-therm0@1 {
+ reg = <1>;
+ io-channels = <&pm6150l_adc ADC5_AMUX_THM3_100K_PU>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,ratiometric;
+ };
+
+ rear-cam-flash-therm@2 {
+ reg = <2>;
+ io-channels = <&pm6150l_adc ADC5_GPIO3_100K_PU>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,ratiometric;
+ };
+
+ quiet-therm@3 {
+ reg = <3>;
+ io-channels = <&pm6150l_adc ADC5_GPIO4_100K_PU>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,ratiometric;
+ };
+};
+
&pm6150l_flash {
status = "okay";
--
2.53.0