[PATCH v4 3/3] arm64: dts: cix: Add Sky1 DP PHY node

[Luo Liu]

Describe the Sky1 DP PHY in the SoC DTSI, including the DPC2 APB
clock shared with the DisplayPort controller, so DisplayPort can
consume it once the controller is enabled. Enable the PHY on the
Radxa Orion O6 board.

Signed-off-by: Luo Liu <Luo.Liu@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/cix/sky1-orion-o6.dts |  4 ++++
 arch/arm64/boot/dts/cix/sky1.dtsi         | 10 ++++++++++
 2 files changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/cix/sky1-orion-o6.dts b/arch/arm64/boot/dts/cix/sky1-orion-o6.dts
index e39c87774c12..b659c10f1f4d 100644
--- a/arch/arm64/boot/dts/cix/sky1-orion-o6.dts
+++ b/arch/arm64/boot/dts/cix/sky1-orion-o6.dts
@@ -36,6 +36,10 @@ linux,cma {
 
 };
 
+&dp_phy {
+	status = "okay";
+};
+
 &fch_gpio0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi
index 0a820f45feb9..cbc14ac5b2b7 100644
--- a/arch/arm64/boot/dts/cix/sky1.dtsi
+++ b/arch/arm64/boot/dts/cix/sky1.dtsi
@@ -762,6 +762,16 @@ ppi_partition1: interrupt-partition-1 {
 			};
 		};
 
+		dp_phy: phy@1414c000 {
+			compatible = "cix,sky1-dp-phy";
+			reg = <0x0 0x1414c000 0x0 0x4000>;
+			clocks = <&scmi_clk CLK_TREE_DPC2_APBCLK>;
+			clock-names = "apb";
+			resets = <&s5_syscon SKY1_DP_PHY_RST_N>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		s5_syscon: syscon@16000000 {
 			compatible = "cix,sky1-s5-system-control", "syscon";
 			reg = <0x0 0x16000000 0x0 0x1000>;
-- 
2.25.1