[PATCH] phy: mediatek: mt8195: Check PLL driver setting return value

[Sreeraj S Kurup]

The mtk_hdmi_pll_drv_setting() function can return -EINVAL when
the requested pixel clock is outside its supported range.

Currently, mtk_hdmi_pll_prepare() ignores this return value and
continues with PLL initialization even when the driver settings
fail.

Check the return value and abort PLL preparation on failure to
avoid powering up the PLL with invalid driver settings.

Signed-off-by: Sreeraj S Kurup <sreekuttan2156239@xxxxxxxxx>
---
 drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
index a4bc1268946d..9658781484f1 100644
--- a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
+++ b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
@@ -360,6 +360,7 @@ static int mtk_hdmi_pll_prepare(struct clk_hw *hw)
 {
 	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
 	void __iomem *regs = hdmi_phy->regs;
+	int ret;
 
 	mtk_phy_set_bits(regs + HDMI_1_CFG_6, RG_HDMITX21_TX_POSDIV_EN);
 
@@ -374,7 +375,9 @@ static int mtk_hdmi_pll_prepare(struct clk_hw *hw)
 	mtk_phy_clear_bits(regs + HDMI_1_CFG_6, RG_HDMITX21_FRL_D2_EN);
 	mtk_phy_clear_bits(regs + HDMI_1_CFG_6, RG_HDMITX21_FRL_CK_EN);
 
-	mtk_hdmi_pll_drv_setting(hw);
+	ret = mtk_hdmi_pll_drv_setting(hw);
+	if (ret)
+		return ret;
 
 	mtk_phy_clear_bits(regs + HDMI_1_CFG_10, RG_HDMITX21_BG_PWD);
 	mtk_phy_set_bits(regs + HDMI_1_CFG_6, RG_HDMITX21_BIAS_EN);
-- 
2.55.0