Re: [PATCH v7 00/14] PCI: rzg3s-host: Add PCIe hotplug support

[Claudiu Beznea]

Hi, Wolfram,

On 10/22/26 22:16, Wolfram Sang wrote:
> Hi Claudiu,
>
> >          i2cset -y 1 0x18 0xf4 0x8 # Link down
> >          i2cset -y 1 0x18 0xf4 0xc # Link up: PCIE_SLOT (NVMe Micron)
>
> So, I applied your patches on current -next and did the above.
>
> During LinkUp the card (Renesas USB3 host controller) got correctly
> re-initialized. Same for physical unplug/plug.

Thank you for testing this series!

> I don't know nothing about PCI, but I wondered about one thing: after
> removal (both physically and via I2C), the card was still present in
> /sys/bus/pci/devices. Is that expected?

I currently can't reproduce this on my side. Do you remember if you executed the 
below command before your test:

echo performance > /sys/module/pcie_aspm/parameters/policy

?

Thank you,
Claudiu