Re: [PATCH 0/4] drm/panel: ili9881c: add support for Mingjun MJ070BI30IA2

[Icenowy Zheng]

在 2026-11-02一的 14:40 +0100，Neil Armstrong写道：
> Hi,
> 
> On Fri, 30 Oct 2026 13:44:11 +0800, Icenowy Zheng wrote:
> > Mingjun MJ070BI30IA2 is a LCD panel used by the Lichee Console 4A
> > device, with a initialization sequence matching other ILI9881C
> > sequences.
> > 
> > In addition to the normal binding + sequence panel adding part,
> > this
> > patchset contains one extra patch trying to address a hardware
> > quirk of
> > Lichee Console 4A -- the panel could never be really powered off /
> > reseted in hardware (the reset pin isn't wired to the mainboard,
> > and the
> > panel is powered with a always-on regulator).
> > 
> > [...]
> 
> Thanks, Applied to
> https://gitlab.freedesktop.org/drm/misc/kernel.git ;(drm-misc-next)
> 
> [1/4] dt-bindings: vendor-prefixes: add Shenzhen Mingjun
> Optoelectronics
>      
> https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/f423a211f99ca820c2c99a84a3418aa505d6dd02
> [2/4] dt-bindings: ili9881c: add compatible string for Mingjun
> MJ070BI30IA2
>      
> https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/ea74b623855291e60835c0f7fa7a29673332ad41
> [3/4] drm/panel: ilitek-ili9881c: add Mingjun MJ070BI30IA2
>       (no commit info)
> [4/4] drm/panel: ilitek-ili9881c: do a soft reset in unprepare

Ah, the 4th patch is now found to be only needed because of the
initialization sequence error found by Sashiko in the 3rd one.

With the initialization sequence fixed by comparing to other panels,
this patch would be unnecessary and panel sleep mode is now safe w/o
software reset.

Should I send a revert when sending the sequence fix?

Thanks,
Icenowy

> callback
>       (no commit info)