Re: [PATCH net-next 4/4] hwmon: add AMD Pensando ionic sensor driver

[Guenter Roeck]

On 11/3/26 10:14, Nikhil P. Rao wrote:
> From: Arun Kumar Prakash <ArunKumar.Prakash@xxxxxxx>
>
> Add an auxiliary driver that binds to the "ionic.hwmon" device created
> by the ionic Ethernet driver and reports the adapter's temperature,
> voltage and power sensors through hwmon.
>
> The sensor set depends on the board and firmware, so the driver reads
> it from the device at probe rather than hard-coding it. A sensor type
> with a channel the driver does not recognise is skipped as a whole,
> since hwmon channel numbers must match the firmware's.
>
> The hwmon device is parented to the adapter's PCI function rather than
> to the auxiliary device, so lm-sensors names it by PCI address instead
> of as a virtual device.
>
> Signed-off-by: Arun Kumar Prakash <ArunKumar.Prakash@xxxxxxx>
> Signed-off-by: Eric Joyner <eric.joyner@xxxxxxx>
> Reviewed-by: Brett Creeley <brett.creeley@xxxxxxx>
> Co-developed-by: Nikhil P. Rao <nikhil.rao@xxxxxxx>
> Signed-off-by: Nikhil P. Rao <nikhil.rao@xxxxxxx>

Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx>

Thanks,
Guenter