[PATCH RFC 3/3] arm64: dts: amlogic: meson-sm1-odroid-hc4: Describe which RTC wakes the board

[Igor Velkov via B4 Relay]

From: Igor Velkov <iav@xxxxxx>

The board has two RTCs with an alarm. The pcf8563 interrupt line goes
to GPIOX_5, so once that interrupt is described [1], its alarm wakes the
board from s2idle but not from deep sleep. meson-vrtc is a register the
SoC firmware reads when the application processors suspend, so it wakes
the board from deep sleep only, and only with a BL301 that handles its
alarm.

List the states per RTC, so that alarmtimer programs the pcf8563 for
s2idle and meson-vrtc for deep sleep.

Link: https://lore.kernel.org/r/20261020-hc4-rtc-alarm-irq-v1-1-b2b8c68d54f5@xxxxxx [1]
Signed-off-by: Igor Velkov <iav@xxxxxx>
---
 arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
index 3ece30a0a1ff..935dd31572cb 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
@@ -106,6 +106,7 @@ rtc: rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 		wakeup-source;
+		linux,wakeup-states = "s2idle";
 	};
 };
 
@@ -142,3 +143,7 @@ &usb {
 	phys = <&usb2_phy0>, <&usb2_phy1>;
 	phy-names = "usb2-phy0", "usb2-phy1";
 };
+
+&vrtc {
+	linux,wakeup-states = "deep";
+};

-- 
2.43.0