Re: [PATCH] iio: pressure: dps310: put the chip in standby on remove

[Paulius Zaleckas]

On Mon, Nov 02, 2026, Rupesh Majhi wrote:
> Remove resets the chip, though all it needs is to stop background
> measurement. Write 0 to MEAS_CTRL instead.

On a ZTS8032, unbind leaves MEAS_CTRL at 0 with the configuration
intact, and 20 unbind/bind cycles read fine.

Tested-by: Paulius Zaleckas <paulius.zaleckas@xxxxxxxxx>

Paulius