[PATCH v3 0/2] iio: adc: add driver for Texas Instruments TLA2528 adc

[Maxime Chevallier]

Hi everyone,

This is V3 for the TLA2528 ADC driver.

It takes all reviews from Jonathan, Matti, Rodolfo and Victor into
account, thanks again everyone for that :)

Matti, I've not put your review tag as I've reworked things quite a bit,
sorry about that.

Maxime

V3:
  - Require channels to be described
  - Use guard()
  - Add Datasheet link
  - Drop the unused registers
  - Use named initializers in the id table
  - Collect Conor's Ack

V2: https://lore.kernel.org/r/20261030164705.297354-1-maxime.chevallier@xxxxxxxxxxx
  - Describe AVDD and DVDD in the bindings instead of vref.
  - Add gpio-controller
  - Allow describing individual ADC channels
  - Switch to regmap with caching
  - Reset the chip at probe time
  - Small cleanups following all the reviews
  - Moved MAINTAINERS to patch 1

V1: https://lore.kernel.org/linux-iio/20251223155534.220504-1-maxime.chevallier@xxxxxxxxxxx/

Maxime Chevallier (2):
  dt-bindings: iio: adc: add Texas Instruments TLA2528
  iio: adc: add driver for Texas Instruments TLA2528 adc

 .../bindings/iio/adc/ti,tla2528.yaml          |  91 ++++++++
 MAINTAINERS                                   |   7 +
 drivers/iio/adc/Kconfig                       |  12 +
 drivers/iio/adc/Makefile                      |   1 +
 drivers/iio/adc/ti-tla2528.c                  | 215 ++++++++++++++++++
 5 files changed, 326 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,tla2528.yaml
 create mode 100644 drivers/iio/adc/ti-tla2528.c

-- 
2.56.0