Re: [PATCH] pinctrl: ingenic: Add the X1600's 32 kHz clock output

[Linus Walleij]

On Sat, Oct 24, 2026 at 7:17 AM Olivier Louvignes <olivier@xxxxxxxxx> wrote:

> PC26's function 0 puts out the RTC's 32 kHz clock. The vendor device
> tree calls that pin setting "rtc32k-enable" (function 5 is its
> "rtc32k-disable"). Add an "rtc32k" group and function for it.
>
> Used on a HiBy R1, whose Bluetooth chip takes it as its sleep clock: on
> a cold boot without it the chip does not answer its reset, with it the
> chip comes up. The clock on the pin was not measured.
>
> Signed-off-by: Olivier Louvignes <olivier@xxxxxxxxx>

Patch applied!

Yours,
Linus Walleij