[PATCH v8 1/4] arm64: dts: renesas: r9a08g046: Enable TSU

[Biju Das]

From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>

Add #cooling-cells to the CPU nodes, and describe the ADC1 (used
exclusively by the TSU) and TSU nodes along with a CPU thermal zone
using passive and critical trip points, with CPU frequency cooling
maps for thermal mitigation.

Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
---
v8:
movedvfrom [1]
[1] https://lore.kernel.org/all/20260925061617.127349-8-biju.das.jz@xxxxxxxxxxxxxx/
---
 arch/arm64/boot/dts/renesas/r9a08g046.dtsi | 66 ++++++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a08g046.dtsi b/arch/arm64/boot/dts/renesas/r9a08g046.dtsi
index f33d5d7468ff..35046c7dac54 100644
--- a/arch/arm64/boot/dts/renesas/r9a08g046.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a08g046.dtsi
@@ -179,6 +179,7 @@ cpu0: cpu@0 {
 			next-level-cache = <&L3_CA55>;
 			enable-method = "psci";
 			clocks = <&cpg CPG_CORE R9A08G046_CLK_IC0>;
+			#cooling-cells = <2>;
 			operating-points-v2 = <&cluster0_opp>;
 		};
 
@@ -189,6 +190,7 @@ cpu1: cpu@100 {
 			next-level-cache = <&L3_CA55>;
 			enable-method = "psci";
 			clocks = <&cpg CPG_CORE R9A08G046_CLK_IC1>;
+			#cooling-cells = <2>;
 			operating-points-v2 = <&cluster0_opp>;
 		};
 
@@ -199,6 +201,7 @@ cpu2: cpu@200 {
 			next-level-cache = <&L3_CA55>;
 			enable-method = "psci";
 			clocks = <&cpg CPG_CORE R9A08G046_CLK_IC2>;
+			#cooling-cells = <2>;
 			operating-points-v2 = <&cluster0_opp>;
 		};
 
@@ -209,6 +212,7 @@ cpu3: cpu@300 {
 			next-level-cache = <&L3_CA55>;
 			enable-method = "psci";
 			clocks = <&cpg CPG_CORE R9A08G046_CLK_IC3>;
+			#cooling-cells = <2>;
 			operating-points-v2 = <&cluster0_opp>;
 		};
 
@@ -374,6 +378,37 @@ scif5: serial@1004e000 {
 			status = "disabled";
 		};
 
+		adc1: adc@108c0000 {
+			compatible = "renesas,r9a08g046-adc1";
+			reg = <0 0x108c0000 0 0x10000>;
+			interrupts = <GIC_SPI 378 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A08G046_ADC1_ADCLK>,
+				 <&cpg CPG_MOD R9A08G046_ADC1_PCLK>;
+			clock-names = "adclk", "pclk";
+			resets = <&cpg R9A08G046_ADC1_PRESETN>,
+				 <&cpg R9A08G046_ADC1_ADRST_N>;
+			reset-names = "presetn", "adrst-n";
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@8 {
+				reg = <8>;
+			};
+		};
+
+		tsu: thermal@108d0000 {
+			compatible = "renesas,r9a08g046-tsu";
+			reg = <0 0x108d0000 0 0x10000>;
+			clocks = <&cpg CPG_MOD R9A08G046_TSU_PCLK>;
+			resets = <&cpg R9A08G046_TSU_PRESETN>;
+			power-domains = <&cpg>;
+			#thermal-sensor-cells = <0>;
+			io-channels = <&adc1 0>;
+			io-channel-names = "tsu";
+		};
+
 		i2c0: i2c@100ae000 {
 			compatible = "renesas,riic-r9a08g046", "renesas,riic-r9a09g057";
 			reg = <0 0x100ae000 0 0x400>;
@@ -1382,6 +1417,37 @@ stmmac_axi_setup: stmmac-axi-config {
 		snps,blen = <16 8 4 0 0 0 0>;
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&tsu>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 0 3>, <&cpu1 0 3>,
+							 <&cpu2 0 3>, <&cpu3 0 3>;
+					contribution = <1024>;
+				};
+			};
+
+			trips {
+				sensor_crit: sensor-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				target: trip-point {
+					temperature = <95000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,

-- 
2.43.0