Re: [PATCH v4 2/2] usb: dwc3: Add Exynos8855 to the generic platform driver

[Thinh Nguyen]

On Mon, Oct 26, 2026, Selvarasu Ganesan wrote:
> Add the "samsung,exynos8855-dwc3" compatible string to dwc3-generic-plat
> so the Exynos8855 DWC3 controller can probe through the generic DWC3
> platform glue. While at it, alphabetically reorder the existing entries.

Please split the reordering into a separate patch, or just add the new
entry without it. There are other pending additions to this driver, and
the reorder will likely cause conflicts.

Thanks,
Thinh

> 
> Co-developed-by: Muhammed Ali <muhammed.ali@xxxxxxxxxxx>
> Signed-off-by: Muhammed Ali <muhammed.ali@xxxxxxxxxxx>
> Signed-off-by: Selvarasu Ganesan <selvarasu.g@xxxxxxxxxxx>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxxxxx>
> ---
>  drivers/usb/dwc3/dwc3-generic-plat.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-generic-plat.c b/drivers/usb/dwc3/dwc3-generic-plat.c
> index ca69ac0eb07c..d57496716204 100644
> --- a/drivers/usb/dwc3/dwc3-generic-plat.c
> +++ b/drivers/usb/dwc3/dwc3-generic-plat.c
> @@ -232,10 +232,11 @@ static const struct dwc3_generic_config eic7700_dwc3 =  {
>  };
>  
>  static const struct of_device_id dwc3_generic_of_match[] = {
> +	{ .compatible = "eswin,eic7700-dwc3", &eic7700_dwc3},
> +	{ .compatible = "fsl,ls1028a-dwc3", &fsl_ls1028_dwc3},
> +	{ .compatible = "samsung,exynos8855-dwc3", },
>  	{ .compatible = "spacemit,k1-dwc3", &spacemit_k1_dwc3},
>  	{ .compatible = "spacemit,k3-dwc3", },
> -	{ .compatible = "fsl,ls1028a-dwc3", &fsl_ls1028_dwc3},
> -	{ .compatible = "eswin,eic7700-dwc3", &eic7700_dwc3},
>  	{ .compatible = "starfive,jhb100-dwc3", },
>  	{ /* sentinel */ }
>  };
> -- 
> 2.17.1
>