[PATCH] i2c: qup: Release DMA channels if interconnect lookup fails

[Yige Jiang]

qup_i2c_probe() acquires both BAM DMA channels before getting its
interconnect path. If devm_of_icc_get() fails, the direct return
skips fail_dma and leaks both channels, including when probe is
deferred. A later probe can no longer acquire those channels.

Keep the reported error code and jump to fail_dma to release the
channels. This avoids the clock and MMIO cleanup, which have not
been initialized at this point.

Fixes: d4f35233a634 ("i2c: qup: Vote for interconnect bandwidth to DRAM")
Signed-off-by: Yige Jiang <yigejiang86@xxxxxxxxx>
---
Based on linux-next next-20261102 (2637bdec0535).
Compile-tested: arm64, GCC 14.2.0, W=1, CONFIG_OF_DYNAMIC=y.
COMPILE_TEST=y.
Baseline and patched target objects built from this exact base.
No full kernel/module-link, hardware or runtime test was performed.
AI assistance was used for analysis and patch preparation.

The error needs an interconnect provider failure/defer after DMA setup.
No in-tree QUP I2C DT with the needed interconnects property was identified.

 drivers/i2c/busses/i2c-qup.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index ce30634e1f40..671bc41a5abf 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -1786,9 +1786,11 @@ static int qup_i2c_probe(struct platform_device *pdev)
 		qup->is_dma = true;
 
 		qup->icc_path = devm_of_icc_get(&pdev->dev, NULL);
-		if (IS_ERR(qup->icc_path))
-			return dev_err_probe(&pdev->dev, PTR_ERR(qup->icc_path),
-					     "failed to get interconnect path\n");
+		if (IS_ERR(qup->icc_path)) {
+			ret = dev_err_probe(&pdev->dev, PTR_ERR(qup->icc_path),
+					    "failed to get interconnect path\n");
+			goto fail_dma;
+		}
 	}
 
 nodma:

base-commit: 2637bdec0535a2044cd830eba9a79363651d9043