[PATCH 2/2] riscv: dts: spacemit: Add K3 CoM260 IFX TQ support

[Troy Mitchell]

Add a device tree for the K3 CoM260 IFX TQ board. It reuses the CoM260
module description for the UART console, Ethernet, module EEPROM and
PMIC.

Describe the carrier's green and yellow Ethernet PHY LEDs while keeping
their existing hardware state. Enable ALDPS power saving on the
RTL8211F PHY and disable its unused CLKOUT output.

Signed-off-by: Troy Mitchell <troy.mitchell@xxxxxxxxxxxxxxxxxx>
---
 arch/riscv/boot/dts/spacemit/Makefile             |  1 +
 arch/riscv/boot/dts/spacemit/k3-com260-ifx-tq.dts | 44 +++++++++++++++++++++++
 2 files changed, 45 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/Makefile b/arch/riscv/boot/dts/spacemit/Makefile
index 851b701e5da4..fe664f84e1dd 100644
--- a/arch/riscv/boot/dts/spacemit/Makefile
+++ b/arch/riscv/boot/dts/spacemit/Makefile
@@ -6,5 +6,6 @@ dtb-$(CONFIG_ARCH_SPACEMIT) += k1-musepi-pro.dtb
 dtb-$(CONFIG_ARCH_SPACEMIT) += k1-orangepi-r2s.dtb
 dtb-$(CONFIG_ARCH_SPACEMIT) += k1-orangepi-rv2.dtb
 dtb-$(CONFIG_ARCH_SPACEMIT) += k3-com260-ifx.dtb
+dtb-$(CONFIG_ARCH_SPACEMIT) += k3-com260-ifx-tq.dtb
 dtb-$(CONFIG_ARCH_SPACEMIT) += k3-deepcomputing-fml13v05.dtb
 dtb-$(CONFIG_ARCH_SPACEMIT) += k3-pico-itx.dtb
diff --git a/arch/riscv/boot/dts/spacemit/k3-com260-ifx-tq.dts b/arch/riscv/boot/dts/spacemit/k3-com260-ifx-tq.dts
new file mode 100644
index 000000000000..6d9b2dbd825d
--- /dev/null
+++ b/arch/riscv/boot/dts/spacemit/k3-com260-ifx-tq.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2026 SpacemiT (Hangzhou) Technology Co. Ltd */
+
+#include <dt-bindings/leds/common.h>
+
+#include "k3-com260.dtsi"
+
+/ {
+	model = "SpacemiT K3 CoM260 IFX TQ";
+	compatible = "spacemit,k3-com260-ifx-tq", "spacemit,k3-com260", "spacemit,k3";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &eth1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&phy1 {
+	realtek,aldps-enable;
+	realtek,clkout-disable;
+
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "keep";
+		};
+
+		led@2 {
+			reg = <2>;
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_YELLOW>;
+			default-state = "keep";
+		};
+	};
+};

-- 
2.56.0