[PATCH 7/7] arm64: dts: apple: t6032-j575d: Add PCIe device nodes

[Janne Grunau]

Add WiFi, Bluetooth, SD-Card reader, ethernet NIC and USB xHCI device
nodes for M3 Ultra Mac Studio.
The bootloader will fill MAC addresses for the network devices, add
Wifi and Bluetooth calibration data and set "apple,antenna-sku".

Signed-off-by: Janne Grunau <j@xxxxxxxxxx>
---
 arch/arm64/boot/dts/apple/t6032-j575d.dts | 72 +++++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/arch/arm64/boot/dts/apple/t6032-j575d.dts b/arch/arm64/boot/dts/apple/t6032-j575d.dts
index 12991546d4bb..f99fd47dfc8d 100644
--- a/arch/arm64/boot/dts/apple/t6032-j575d.dts
+++ b/arch/arm64/boot/dts/apple/t6032-j575d.dts
@@ -16,7 +16,10 @@ / {
 	model = "Apple Mac Studio (M3 Ultra, 2025)";
 
 	aliases {
+		bluetooth0 = &bluetooth0;
+		ethernet0 = &ethernet0;
 		serial0 = &serial0;
+		wifi0 = &wifi0;
 	};
 
 	chosen {
@@ -46,3 +49,72 @@ memory@10000000000 {
 &serial0 {
 	status = "okay";
 };
+
+/* PCIe devices */
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+&port00 {
+	/* WLAN */
+	bus-range = <1 1>;
+
+	wifi0: wifi@0,0 {
+		compatible = "pci14e4,4433";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 10];
+		apple,antenna-sku = "XX";
+		brcm,board-type = "apple,aruba";
+	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f71";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
+		brcm,board-type = "apple,aruba";
+	};
+};
+
+&port01 {
+	/* SD card reader */
+	bus-range = <2 2>;
+
+	mmc@0,0 {
+		compatible = "pci17a0,9755";
+		reg = <0x20000 0x0 0x0 0x0 0x0>;
+		cd-inverted;
+		wp-inverted;
+	};
+};
+
+&port02 {
+	/* AQC113 10 Gbit Ethernet */
+	bus-range = <3 3>;
+	status = "okay";
+
+	ethernet0: ethernet@0,0 {
+		compatible = "pci1d6a,04c0";
+		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 00];
+	};
+};
+
+&port03 {
+	/* USB xHCI */
+	bus-range = <4 4>;
+	status = "okay";
+};
+
+
+&pcie0_dart_2 {
+	status = "okay";
+};
+
+&pcie0_dart_3 {
+	status = "okay";
+};

-- 
2.56.0