Re: [PATCH 4/8] pwm: axi-pwmgen: Enable clocks before accessing hardware registers in probe()

[Uwe Kleine-König]

On Thu, Nov 05, 2026 at 02:38:06PM +0000, Lee Jones wrote:
> axi_pwmgen_probe() calls axi_pwmgen_setup(), which reads and writes MMIO
> registers to verify the IP core version and determine the channel count,
> before acquiring and enabling axi_clk.  If the bootloader leaves the AXI
> peripheral clock gated, accessing the registers causes an unclocked bus
> access fault.

Do you have the hardware? Or what convinced you that an access fault
happens?

Best regards
Uwe

Attachment: signature.asc
Description: PGP signature