[PATCH 0/3] ARM: dts: aspeed: ventura2: Add LTC2305 ADCs and GPIO line names

From: Kyle Hsieh

Date: Thu Nov 05 2026 - 22:03:43 EST


This series is a follow-up to the Ventura2 devicetree.

Patch 1 describes the three LTC2305 ADCs fitted on Ventura2 and exposes
the valve voltages read by the bus 3 ADCs through iio-hwmon.

The LTC2305 ADCs use their internal 4.096V reference, so no vref-supply
is described. Patch 1 therefore depends on "dt-bindings: iio: adc:
ltc2497: Make vref-supply optional for LTC2305/LTC2309"; without it,
dtbs_check reports a missing vref-supply for the LTC2305 nodes.

Patch 2 names the presence detect GPIO of the optional COM Express
module so userspace can determine whether the module is present.

Patch 3 names the reset GPIOs of the three USB-to-UART bridges so
userspace can reset the bridges.

Signed-off-by: Kyle Hsieh <kylehsieh1995@xxxxxxxxx>
---
Kyle Hsieh (3):
ARM: dts: aspeed: ventura2: Add LTC2305 ADCs
ARM: dts: aspeed: ventura2: Name the COMe presence GPIO
ARM: dts: aspeed: ventura2: Name the USB-UART bridge reset GPIOs

.../dts/aspeed/aspeed-bmc-facebook-ventura2.dts | 36 ++++++++++++++++++++--
1 file changed, 33 insertions(+), 3 deletions(-)
---
base-commit: f4dcbba2ec358f7079daddcda7594dad9746326a
change-id: 20261106-ventura2-dts-update-f00bc0510b2b

Best regards,
--
Kyle Hsieh <kylehsieh1995@xxxxxxxxx>