[PATCH v7 7/8] arm64: dts: qcom: kodiak: Add JPEG encoder node

[Atanas Filipov]

Add the JPEG encoder hardware node to the SC7280 (Kodiak) device tree
so the qcom-jpeg V4L2 encoder driver can bind and operate on this
platform. The node is disabled by default.

Signed-off-by: Atanas Filipov <atanas.filipov@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/kodiak.dtsi | 69 ++++++++++++++++++++++++++++
 1 file changed, 69 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/kodiak.dtsi b/arch/arm64/boot/dts/qcom/kodiak.dtsi
index 8c7523602d271..463ca9a654365 100644
--- a/arch/arm64/boot/dts/qcom/kodiak.dtsi
+++ b/arch/arm64/boot/dts/qcom/kodiak.dtsi
@@ -5164,6 +5164,75 @@ cci1_i2c1: i2c-bus@1 {
 			};
 		};
 
+		jpeg_enc: jpeg-encoder@ac4e000 {
+			compatible = "qcom,sc7280-jpeg-enc";
+			status = "disabled";
+
+			reg = <0x0 0x0ac4e000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 474 IRQ_TYPE_EDGE_RISING>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>,
+					<&rpmhpd SC7280_CX>;
+			power-domain-names = "titan_top", "cx";
+
+			clocks = <&gcc GCC_CAMERA_SF_AXI_CLK>,
+				 <&camcc CAM_CC_CORE_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CAMNOC_AXI_CLK_SRC>,
+				 <&camcc CAM_CC_JPEG_CLK>;
+
+			clock-names = "bus",
+				      "config",
+				      "cpas",
+				      "camnoc_axi",
+				      "camnoc_axi_src",
+				      "core";
+
+			interconnects = <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "camnoc";
+
+			iommus = <&apps_smmu 0x20c0 0x20>;
+
+			operating-points-v2 = <&jpeg_opp_table>;
+
+			jpeg_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					opp-peak-kBps = <258480>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-peak-kBps = <531480>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+					opp-peak-kBps = <1006560>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-480000000 {
+					opp-hz = /bits/ 64 <480000000>;
+					opp-peak-kBps = <1084440>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-600000000 {
+					opp-hz = /bits/ 64 <600000000>;
+					opp-peak-kBps = <1084440>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
 		camss: isp@acb3000 {
 			compatible = "qcom,sc7280-camss";
 
-- 
2.34.1