[PATCH v3 4/8] arm64: dts: qcom: glymur-crd: Fix L8B0 voltage

[Konrad Dybcio]

From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

L8B0 supplies the 3.3 V rail of the PTN3222 eUSB2 repeaters, but is
configured to 1.504 V. Set it to the right range.

Fixes: 9314c6ecace1 ("arm64: dts: qcom: glymur: Enable Glymur CRD board support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/glymur-crd.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
index 422b3778c22a..aa63ae968bae 100644
--- a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
@@ -362,8 +362,8 @@ vreg_l2b0: ldo2 {
 
 	vreg_l8b0: ldo8 {
 		regulator-name = "vreg_l8b0";
-		regulator-min-microvolt = <1504000>;
-		regulator-max-microvolt = <1504000>;
+		regulator-min-microvolt = <3304000>;
+		regulator-max-microvolt = <3304000>;
 		regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 	};
 

-- 
2.56.0