[PATCH 1/2] regulator: dt-bindings: willsemi,wl2868c: add the WL2868C camera PMIC

[Qianhui Xu]

The WL2868C is an I2C-controlled camera power management IC from Will
Semiconductor. It provides seven programmable LDOs: LDO1 and LDO2 are fed
from a shared VIN12 input and cover 0.496 V to 1.512 V, LDO3 and LDO4 share
VIN34, and LDO5 to LDO7 each have their own input, covering 1.504 V to
3.544 V. All outputs are programmable in 8 mV steps and are gated by
per-output enable bits with a chip-wide SYS_EN master. The chip also
exposes an optional active-low RST_N input.

VIN7 and VSYS are both inputs of the internal control logic, which is
powered from the higher of the two voltages, so a device tree has to
describe at least one of them. The remaining inputs only feed LDOs, so
they stay optional: an input can be left unconnected when the outputs it
feeds are unused on a given board.

Signed-off-by: Qianhui Xu <xiaqinghuan@xxxxxxxxxxxxxxxx>
---
 .../bindings/regulator/willsemi,wl2868c.yaml  | 104 ++++++++++++++++++
 MAINTAINERS                                   |   7 ++
 2 files changed, 111 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/willsemi,wl2868c.yaml

diff --git a/Documentation/devicetree/bindings/regulator/willsemi,wl2868c.yaml b/Documentation/devicetree/bindings/regulator/willsemi,wl2868c.yaml
new file mode 100644
index 0000000000..df7990d0d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/willsemi,wl2868c.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/willsemi,wl2868c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Will Semiconductor WL2868C camera power management IC
+
+maintainers:
+  - Qianhui Xu <xiaqinghuan@xxxxxxxxxxxxxxxx>
+
+description:
+  The WL2868C is a camera power management IC with seven programmable LDOs.
+  LDO1 and LDO2 share the VIN12 input and cover 0.496 V to 1.512 V; LDO3 and
+  LDO4 share VIN34, and LDO5 to LDO7 have one input each, covering 1.504 V to
+  3.544 V. All outputs are programmable in 8 mV steps.
+
+  VIN7 and VSYS feed the internal control logic, which is powered from the
+  higher of the two, so at least one of them has to be connected. The other
+  inputs only feed LDOs, so an input may be left unconnected on a board
+  that does not use the outputs it feeds, which is why they are not
+  mandatory.
+
+properties:
+  compatible:
+    const: willsemi,wl2868c
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: Active-low RST_N input.
+
+  vin12-supply:
+    description: Input supply for LDO1 and LDO2.
+
+  vin34-supply:
+    description: Input supply for LDO3 and LDO4.
+
+  vin5-supply:
+    description: Input supply for LDO5.
+
+  vin6-supply:
+    description: Input supply for LDO6.
+
+  vin7-supply:
+    description:
+      Input supply for LDO7 and one of the two supplies of the internal
+      control logic.
+
+  vsys-supply:
+    description:
+      System supply, the other supply of the internal control logic. The
+      control logic is powered from the higher of VIN7 and VSYS.
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      "^ldo[1-7]$":
+        type: object
+        $ref: regulator.yaml#
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+anyOf:
+  - required:
+      - vin7-supply
+  - required:
+      - vsys-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@2f {
+            compatible = "willsemi,wl2868c";
+            reg = <0x2f>;
+            vsys-supply = <&vsys_reg>;
+
+            regulators {
+                ldo1 {
+                    regulator-max-microvolt = <1128000>;
+                    regulator-min-microvolt = <1128000>;
+                };
+            };
+        };
+    };
+
+    vsys_reg: regulator-vsys {
+        compatible = "regulator-fixed";
+        regulator-name = "vsys";
+    };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index fe23913b1e..08cfa3db0e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -30180,6 +30180,13 @@ L:	linux-input@xxxxxxxxxxxxxxx
 S:	Maintained
 F:	drivers/hid/hid-wiimote*
 
+WILLSEMI WL2868C CAMERA PMIC
+M:	Qianhui Xu <xiaqinghuan@xxxxxxxxxxxxxxxx>
+L:	linux-kernel@xxxxxxxxxxxxxxx
+S:	Maintained
+F:	Documentation/devicetree/bindings/regulator/willsemi,wl2868c.yaml
+F:	drivers/regulator/wl2868c-regulator.c
+
 WILOCITY WIL6210 WIRELESS DRIVER
 L:	linux-wireless@xxxxxxxxxxxxxxx
 S:	Orphan