Re: [PATCH v8 1/2] regulator: dt-bindings: willsemi,wl2868c: add the WL2868C camera PMIC

[Conor Dooley]

On Fri, Nov 06, 2026 at 07:42:51PM +0800, Qianhui Xu wrote:
> The WL2868C is an I2C-controlled camera power management IC from Will
> Semiconductor. It provides seven programmable LDOs: LDO1 and LDO2 are fed
> from a shared VIN12 input and cover 0.496 V to 1.512 V, LDO3 and LDO4 share
> VIN34, and LDO5 to LDO7 each have their own input, covering 1.504 V to
> 3.544 V. All outputs are programmable in 8 mV steps and are gated by
> per-output enable bits with a chip-wide SYS_EN master. The chip also
> exposes an optional active-low RST_N input.
> 
> VIN7 and VSYS are both inputs of the internal control logic, which is
> powered from the higher of the two voltages, so a device tree has to
> describe at least one of them. The remaining inputs only feed LDOs, so
> they stay optional: an input can be left unconnected when the outputs it
> feeds are unused on a given board.
> 
> Signed-off-by: Qianhui Xu <xiaqinghuan@xxxxxxxxxxxxxxxx>

Rob#s feedback on v6 was ignored:
https://lore.kernel.org/all/20261106141036.GA2921668-robh@xxxxxxxxxx/

pw-bot: changes-requested

Thanks,
Conor.

> ---
>  .../bindings/regulator/willsemi,wl2868c.yaml  | 104 ++++++++++++++++++
>  MAINTAINERS                                   |   7 ++
>  2 files changed, 111 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/regulator/willsemi,wl2868c.yaml
> 
> diff --git a/Documentation/devicetree/bindings/regulator/willsemi,wl2868c.yaml b/Documentation/devicetree/bindings/regulator/willsemi,wl2868c.yaml
> new file mode 100644
> index 0000000000..df7990d0d8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/willsemi,wl2868c.yaml
> @@ -0,0 +1,104 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/regulator/willsemi,wl2868c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Will Semiconductor WL2868C camera power management IC
> +
> +maintainers:
> +  - Qianhui Xu <xiaqinghuan@xxxxxxxxxxxxxxxx>
> +
> +description:
> +  The WL2868C is a camera power management IC with seven programmable LDOs.
> +  LDO1 and LDO2 share the VIN12 input and cover 0.496 V to 1.512 V; LDO3 and
> +  LDO4 share VIN34, and LDO5 to LDO7 have one input each, covering 1.504 V to
> +  3.544 V. All outputs are programmable in 8 mV steps.
> +
> +  VIN7 and VSYS feed the internal control logic, which is powered from the
> +  higher of the two, so at least one of them has to be connected. The other
> +  inputs only feed LDOs, so an input may be left unconnected on a board
> +  that does not use the outputs it feeds, which is why they are not
> +  mandatory.
> +
> +properties:
> +  compatible:
> +    const: willsemi,wl2868c
> +
> +  reg:
> +    maxItems: 1
> +
> +  reset-gpios:
> +    maxItems: 1
> +    description: Active-low RST_N input.
> +
> +  vin12-supply:
> +    description: Input supply for LDO1 and LDO2.
> +
> +  vin34-supply:
> +    description: Input supply for LDO3 and LDO4.
> +
> +  vin5-supply:
> +    description: Input supply for LDO5.
> +
> +  vin6-supply:
> +    description: Input supply for LDO6.
> +
> +  vin7-supply:
> +    description:
> +      Input supply for LDO7 and one of the two supplies of the internal
> +      control logic.
> +
> +  vsys-supply:
> +    description:
> +      System supply, the other supply of the internal control logic. The
> +      control logic is powered from the higher of VIN7 and VSYS.
> +
> +  regulators:
> +    type: object
> +    additionalProperties: false
> +
> +    patternProperties:
> +      "^ldo[1-7]$":
> +        type: object
> +        $ref: regulator.yaml#
> +        unevaluatedProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - regulators
> +
> +anyOf:
> +  - required:
> +      - vin7-supply
> +  - required:
> +      - vsys-supply
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        pmic@2f {
> +            compatible = "willsemi,wl2868c";
> +            reg = <0x2f>;
> +            vsys-supply = <&vsys_reg>;
> +
> +            regulators {
> +                ldo1 {
> +                    regulator-max-microvolt = <1128000>;
> +                    regulator-min-microvolt = <1128000>;
> +                };
> +            };
> +        };
> +    };
> +
> +    vsys_reg: regulator-vsys {
> +        compatible = "regulator-fixed";
> +        regulator-name = "vsys";
> +    };
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index fe23913b1e..08cfa3db0e 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -30180,6 +30180,13 @@ L:	linux-input@xxxxxxxxxxxxxxx
>  S:	Maintained
>  F:	drivers/hid/hid-wiimote*
>  
> +WILLSEMI WL2868C CAMERA PMIC
> +M:	Qianhui Xu <xiaqinghuan@xxxxxxxxxxxxxxxx>
> +L:	linux-kernel@xxxxxxxxxxxxxxx
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/regulator/willsemi,wl2868c.yaml
> +F:	drivers/regulator/wl2868c-regulator.c
> +
>  WILOCITY WIL6210 WIRELESS DRIVER
>  L:	linux-wireless@xxxxxxxxxxxxxxx
>  S:	Orphan
>

Attachment: signature.asc
Description: PGP signature