[PATCH] arm64: dts: qcom: mahua-lenovo-thinkpad-t14s-gen7: Add touchscreen support

From: Abel Vesa

Date: Fri Nov 06 2026 - 15:51:14 EST


The touch SKU of the ThinkPad T14s Gen 7 has a HID-over-I2C
touchscreen (Parade, HID 1da0:3009) at address 0x24 on QUP i2c8.
Its interrupt is GPIO 51 (level, active low) and GPIO 48 is the
active-low reset line, which is kept deasserted.

Describe it so the touchscreen works.

Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxxxxxxxx>
---
.../qcom/mahua-lenovo-thinkpad-t14s-gen7-lcd.dts | 34 ++++++++++++++++++++++
1 file changed, 34 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/mahua-lenovo-thinkpad-t14s-gen7-lcd.dts b/arch/arm64/boot/dts/qcom/mahua-lenovo-thinkpad-t14s-gen7-lcd.dts
index 26d6d8285e04..f19ec3aa89a1 100644
--- a/arch/arm64/boot/dts/qcom/mahua-lenovo-thinkpad-t14s-gen7-lcd.dts
+++ b/arch/arm64/boot/dts/qcom/mahua-lenovo-thinkpad-t14s-gen7-lcd.dts
@@ -735,6 +735,23 @@ ptn3222_fpr: redriver@4f {
};
};

+&i2c8 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ touchscreen@24 {
+ compatible = "hid-over-i2c";
+ reg = <0x24>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-0 = <&ts0_default>;
+ pinctrl-names = "default";
+ };
+};
+
&lpass_vamacro {
pinctrl-0 = <&dmic01_default>;
pinctrl-names = "default";
@@ -1101,6 +1118,23 @@ tpad_default: tpad-default-state {
bias-disable;
};

+ ts0_default: ts0-default-state {
+ int-n-pins {
+ pins = "gpio51";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ reset-n-pins {
+ pins = "gpio48";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
wcn_wlan_bt_en: wcn-wlan-bt-en-state {
pins = "gpio116", "gpio117";
function = "gpio";

---
base-commit: ddfe51b0a0f5dc9e415cc2c8ad8db17532dd426b
change-id: 20261106-mahua-t14s-gen7-touchscreen-9f6356c88b96

Best regards,
--

Abel