Re: [PATCH v2 1/4] iio: light: ltr501: Switch to read_avail() op from manual attribute registration

From: Jonathan Cameron

Date: Fri Nov 06 2026 - 22:21:06 EST


On Fri, 6 Nov 2026 11:19:40 +0200
Svyatoslav Ryhel <clamor95@xxxxxxxxx> wrote:

> Switch to the read_avail() operation from manual attribute group
> registration. This eliminates the need for per-chip attribute_group
> structures and related ltr501_chip_info iio_info entries.
>
> Signed-off-by: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
Given you were quick off the mark on sashiko on v1, I guess
you already saw:
https://sashiko.dev/#/patchset/20261106091943.35783-1-clamor95%40gmail.com

It seems correct that you'll only get one attribute where there were two
before. I suspect it's as simple as the mask should be set of
shared_by_type_available not shared_by_all for scale and shared_by_all
for only sampling frequency and integration time.

The current code is odd in having per type sampling_freq and integration
time as both apply to the light channel as well I think. Not vital
to fix that though so I'd just split the mask to make it work for both
as it does today.

The current way the two Intensity channels is done is very odd.
The .info_mask_shared_by_type should be the same for both of them
(only one set of attrs will be created).
Ideally fix that as a precursor patch (don't label it as a fix
though as it's just a code consistency thing rather than actually
resulting in a change.)


> ---
> drivers/iio/light/ltr501.c | 153 +++++++++++++------------------------
> 1 file changed, 52 insertions(+), 101 deletions(-)
>

> static const struct iio_info ltr501_info = {
> .read_raw = ltr501_read_raw,
> .write_raw = ltr501_write_raw,
> - .attrs = &ltr501_attribute_group,
> - .read_event_value = &ltr501_read_event,
> - .write_event_value = &ltr501_write_event,
> - .read_event_config = &ltr501_read_event_config,
> - .write_event_config = &ltr501_write_event_config,
> -};
> -
> -static const struct iio_info ltr301_info_no_irq = {
> - .read_raw = ltr501_read_raw,
> - .write_raw = ltr501_write_raw,
> - .attrs = &ltr301_attribute_group,
> -};
> -
> -static const struct iio_info ltr301_info = {
> - .read_raw = ltr501_read_raw,
> - .write_raw = ltr501_write_raw,
> - .attrs = &ltr301_attribute_group,
> - .read_event_value = &ltr501_read_event,
> - .write_event_value = &ltr501_write_event,
> - .read_event_config = &ltr501_read_event_config,
> - .write_event_config = &ltr501_write_event_config,
> + .read_avail = ltr501_read_avail,
> + .read_event_value = &ltr501_read_event,
> + .write_event_value = &ltr501_write_event,
> + .read_event_config = &ltr501_read_event_config,
> + .write_event_config = &ltr501_write_event_config,

I'd prefer a precursor patch tidying up the indent as that should make
the diff on this patch easier to read.


> };