[PATCH] platform/x86: acer-wmi: Add support for Acer Nitro AN16-51
From: Bekir Ün via B4 Relay
Date: Sat Nov 07 2026 - 15:20:24 EST
From: Bekir Ün <bekiirun@xxxxxxxxx>
The Acer Nitro AN16-51 supports the same gaming WMI interface as the
Nitro AN515-58 and AN16-41. Its ACPI tables (WMBH method on GUID
7A4DDFE7-5B5D-40B4-8595-4408E0CC7F56) handle the thermal profile misc
setting 0x0B with the values quiet (0x00), balanced (0x01), performance
(0x04), turbo (0x05) and eco (0x06), and report the supported sensors
as 0x0227 (CPU/GPU temperature, CPU/GPU fan speed, external
temperature 2).
Add a DMI entry so that platform profile, hwmon and fan control are
enabled without the predator_v4 module parameter.
Tested on an Acer Nitro AN16-51 (BIOS V1.12):
- All five platform profiles can be selected through sysfs and
power-profiles-daemon; the mode key cycles through them and the
key LED changes accordingly.
- fan1/fan2 and temp1/temp3 report plausible values; under full CPU
load in the turbo profile both fans ramp up to ~5850 RPM. temp2
(external temperature 2) always reads 0, the firmware advertises it
but the EC field it reads is not populated.
- pwm1/pwm2: pwm_enable 0 (max) gives ~6600 RPM, pwm_enable 1 with
pwm 128 gives ~4000 RPM, pwm_enable 2 returns to automatic control.
Profiles and sensors were tested with predator_v4=1 on 7.2.14, fan
control with this DMI entry applied to the 7.2.11 acer-wmi driver.
The ACPI analysis, the change and this message were prepared with the
help of an AI coding assistant (Claude, Anthropic) and tested by me on
the hardware.
Signed-off-by: Bekir Ün <bekiirun@xxxxxxxxx>
---
Single DMI entry for the Acer Nitro AN16-51, reusing the AN515-58
quirk. Test details are in the commit message.
---
drivers/platform/x86/acer-wmi.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 3a018fdf5..08f663fc6 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -690,6 +690,15 @@ static const struct dmi_system_id acer_quirks[] __initconst = {
},
.driver_data = &quirk_acer_nitro_an515_58,
},
+ {
+ .callback = dmi_matched,
+ .ident = "Acer Nitro AN16-51",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Nitro AN16-51"),
+ },
+ .driver_data = &quirk_acer_nitro_an515_58,
+ },
{
.callback = dmi_matched,
.ident = "Acer Nitro AN515-58",
---
base-commit: c339f4010dea8b0d754f84ace70cd1b089878ef8
change-id: 20261107-acer-nitro-an16-51-964e76bf3974
Best regards,
--
Bekir Ün <bekiirun@xxxxxxxxx>