Re: [PATCH 0/3] ARM: dts: aspeed: ventura2: Add LTC2305 ADCs and GPIO line names

From: Andrew Jeffery

Date: Sun Nov 08 2026 - 21:42:02 EST


On Fri, 2026-11-06 at 11:08 +0800, Kyle Hsieh wrote:
> This series is a follow-up to the Ventura2 devicetree.
>
> Patch 1 describes the three LTC2305 ADCs fitted on Ventura2 and exposes
> the valve voltages read by the bus 3 ADCs through iio-hwmon.
>
> The LTC2305 ADCs use their internal 4.096V reference, so no vref-supply
> is described. Patch 1 therefore depends on "dt-bindings: iio: adc:
> ltc2497: Make vref-supply optional for LTC2305/LTC2309"; without it,
> dtbs_check reports a missing vref-supply for the LTC2305 nodes.

Can you provide a link to this patch? I am yet to find it on lore.

>
> Patch 2 names the presence detect GPIO of the optional COM Express
> module so userspace can determine whether the module is present.
>
> Patch 3 names the reset GPIOs of the three USB-to-UART bridges so
> userspace can reset the bridges.

This isn't so much a summary as something self-evident from looking at
the contained patches.

In my opinion what you write here should identify broad patterns across
the patch series (perhaps how you've grouped the patches and why, if
necessary) and not rehash the commit messages.

Andrew