[PATCH v2 0/2] phy: ath79-usb: support the AR934x+ analog reset

[Rosen Penev]

>From AR934x on, the analog part of the ath79 USB PHY has its own reset,
which the old platform code handled outside the PHY driver. Patch 1
adds the optional third "phy-analog" reset to the binding, along with
AR9340 and QCA9550 compatibles that require it. Patch 2 makes the
driver take and sequence that reset.

Changes in v2:
- Send the binding and driver changes together as one series. v1 sent
  the driver patch alone, so it used a "phy-analog" reset name that the
  binding on the list did not yet document.
- No code changes.

Claude Code (Claude Opus 5.5) was used while preparing this series.
I reviewed and tested every change and take responsibility for it.

Rosen Penev (2):
  dt-bindings: phy: qca,ar7100-usb-phy: add AR9340, QCA9550 and the
    analog reset
  phy: ath79-usb: support the analog reset

 .../bindings/phy/qca,ar7100-usb-phy.yaml      | 38 ++++++++++++++++++-
 drivers/phy/qualcomm/phy-ath79-usb.c          | 33 ++++++++++++++--
 2 files changed, 67 insertions(+), 4 deletions(-)

-- 
2.56.0