[PATCH 2/2] remoteproc: k3-m4: Leave crash recovery enabled

[Chrispine Tinega]

The M4 driver disables recovery, but nothing reported a crash to the
remoteproc core, so there was nothing to recover from. Now that
RP_MBOX_CRASH reaches rproc_report_crash(), recovery resets the M4F and
boots its firmware again, while Linux keeps running. The stop is a
plain reset, so it does not need the crashed core's cooperation.

Leave recovery enabled by default. Userspace can still disable it
through /sys/class/remoteproc/remoteprocN/recovery.

Signed-off-by: Chrispine Tinega <dev@xxxxxxxxxxxxxxxxxxx>
---
 drivers/remoteproc/ti_k3_m4_remoteproc.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/remoteproc/ti_k3_m4_remoteproc.c b/drivers/remoteproc/ti_k3_m4_remoteproc.c
index 4c46f4a25..fbd2b7c04 100644
--- a/drivers/remoteproc/ti_k3_m4_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_m4_remoteproc.c
@@ -56,7 +56,6 @@ static int k3_m4_rproc_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	rproc->has_iommu = false;
-	rproc->recovery_disabled = true;
 	kproc = rproc->priv;
 	kproc->dev = dev;
 	kproc->rproc = rproc;
-- 
2.53.0