[PATCH 0/4] ARM: dts: stm32: adopt hex format for timers

[Fabrice Gasnier]

This series intends to comply with hexadecimal unit addresses for timer
subnodes as described in  ("dt-bindings: Use hex unit address patterns").

Also update hexadecimal format for 'reg' property in these nodes. Take
care to update the boards accordingly. Note there aren't in-tree overlays
impacted.

Purpose is to avoid upcoming new dtbs_check logs like:
make CHECK_DTBS=y st/stm32mp135f-dk.dtb
...
stm32mp135f-dk.dtb: timer@4c00a000 (st,stm32-timers): 'timer@14' does not
match any of the regexes: '^pinctrl-[0-9]+$', '^timer@([0-9a-f]|1[0-3])$'
from schema $id: http://devicetree.org/schemas/mfd/st,stm32-timers.yaml
...

Link: https://patch.msgid.link/linux-devicetree/20261102135330.2493332-1-robh@xxxxxxxxxx/
---
Fabrice Gasnier (4):
      ARM: dts: stm32: Use hex timer addresses on stm32mp13
      ARM: dts: stm32: Use hex timer addresses on stm32mp15
      ARM: dts: stm32: use hex reg for timer2 on stm32mp15xx-dhcom-overlay
      arm64: dts: stm32: Use hex timer addresses on stm32mp251

 arch/arm/boot/dts/st/stm32mp131.dtsi               | 46 ++++++++---------
 arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts   |  2 +-
 arch/arm/boot/dts/st/stm32mp135f-dk.dts            |  2 +-
 arch/arm/boot/dts/st/stm32mp151.dtsi               | 46 ++++++++---------
 arch/arm/boot/dts/st/stm32mp157c-ev1.dts           |  2 +-
 arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts |  2 +-
 .../st/stm32mp15xx-dhcom-overlay-panel-dpi.dtsi    |  2 +-
 arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi          |  2 +-
 arch/arm64/boot/dts/st/stm32mp251.dtsi             | 60 +++++++++++-----------
 arch/arm64/boot/dts/st/stm32mp257f-ev1.dts         |  2 +-
 10 files changed, 83 insertions(+), 83 deletions(-)
---
base-commit: f39a4c5c819bcf18c7543cccdfd2215ceb4daa53
change-id: 20261109-timer-use-hex-unit-addr-545d9dbd3331

Best regards,
--  
Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>