Re: [PATCH v2] phy: phy-bcm-ns2-usbdrd: cancel extcon work on unbind to avoid use-after-free

[Ray Jui]

Hi Hyunjungg,

On Mon, Nov 9, 2026 at 10:02 AM hyunjungg <hj351016@xxxxxxxxx> wrote:
>
> From: Hyunjung Ko <hj351016@xxxxxxxxx>
>
> ns2_drd_phy_probe() schedules driver->wq_extcon (extcon_work), which is
> also queued from the ID/VBUS GPIO interrupt handler gpio_irq_handler().
> The work handler dereferences the driver data via container_of().
>
> struct ns2_phy_driver is allocated with devm_kzalloc() and the driver has
> no remove callback, so on unbind devres frees it after probe's resources
> are released. The GPIO interrupts are requested with devm_request_irq(),
> and so released by devres; free_irq() only stops further interrupts, it
> does not cancel a delayed work that is already queued. probe() queues
> wq_extcon with a debounce delay before returning, and the GPIO interrupt
> can queue it too, so on unbind the pending work can run after
> ns2_phy_driver has been freed, dereferencing freed memory (use-after-free).
>
> Register the work with devm_delayed_work_autocancel() instead of
> INIT_DELAYED_WORK(). It is set up before the GPIO interrupts are
> requested, so on unwind devres frees the interrupts first - after which
> the work can no longer be queued - and then cancels the work while the
> driver data is still valid. extcon_work() does not re-queue itself, so a
> single cancel drains it.
>
> Found by static analysis and code review; not runtime-reproduced (needs
> Broadcom Northstar2 USB DRD PHY hardware).
>
> Fixes: 787f24543c4a ("phy: phy-bcm-ns2-usbdrd: Broadcom USB DRD PHY driver for Northstar2")
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Hyunjung Ko <hj351016@xxxxxxxxx>
> ---
> Changes in v2:
> - Reword the commit message: the GPIO interrupts are requested with
>   devm_request_irq() and released by devres (not "released with
>   devm_request_irq()") (Ray Jui).
> - Place the new #include <linux/devm-helpers.h> in alphabetical order,
>   after <linux/delay.h> (Ray Jui).
>
>  drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c
> index 171bf09..4b8930b 100644
> --- a/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c
> +++ b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c
> @@ -2,6 +2,7 @@
>  // Copyright (C) 2017 Broadcom
>
>  #include <linux/delay.h>
> +#include <linux/devm-helpers.h>
>  #include <linux/extcon-provider.h>
>  #include <linux/gpio/consumer.h>
>  #include <linux/init.h>
> @@ -339,7 +340,9 @@ static int ns2_drd_phy_probe(struct platform_device *pdev)
>         if (ret < 0)
>                 driver->debounce_jiffies = msecs_to_jiffies(GPIO_DELAY);
>
> -       INIT_DELAYED_WORK(&driver->wq_extcon, extcon_work);
> +       ret = devm_delayed_work_autocancel(dev, &driver->wq_extcon, extcon_work);
> +       if (ret)
> +               return ret;
>
>         driver->id_irq = gpiod_to_irq(driver->id_gpiod);
>         if (driver->id_irq < 0) {
> --
> 2.43.0

Thanks for the quick fix. This patch looks good to me.

Acked-by: Ray Jui <ray.jui@xxxxxxxxxxxx>

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature