Re: (subset) [PATCH v4 0/6] Fix SATA support for NSP SoCs

[Florian Fainelli]

On 11/7/26 04:45, Niklas Cassel wrote:
> On Thu, 29 Oct 2026 14:25:07 -0700, Florian Fainelli wrote:
> > This patch series fixes SATA on the Northstar Plus (BCM58xxx/8831x)
> > which was broken due to a number of things:
> >
> > - the SATA PHY assumed separate PCB windows when a shared one is used
> >    for this generation of SoCs
> > - the clock/reset (IDM) was not being configured by the driver which
> >    meant that depending upon what the boot loader did, or did not, we
> >    could have had the AHCI controller still in reset by then
> > - on some reference boards, the AHCI controller is not DMA coherent,
> >    assuming so leads to all sorts of timeouts, data corruption, etc.
> >
> > [...]
>
> Applied to libata/linux.git (for-7.5), thanks!
>
> [2/6] dt-bindings: ata: sata-brcm: Describe the NSP IDM registers
>        https://git.kernel.org/libata/linux/c/262e3bbc
> [3/6] ata: ahci_brcm: Initialize the NSP interface clock and reset
>        https://git.kernel.org/libata/linux/c/14d30246

Thank you Niklas, Kishon, can you take patch #1 through your PHY tree 
and I will take patches 4-6 through the broadcom ARM SoC trees. Thanks!
--
Florian