[PATCH v4 0/2] Add LT8491 driver
From: John Erasmus Mari Geronimo
Date: Mon Nov 09 2026 - 21:32:46 EST
The LT8491 is a buck-boost switching regulator battery charger that
implements a constant-current constant-voltage (CCCV) charging profile.
Changes since v3:
https://lore.kernel.org/all/20261029073012.1498-1-johnerasmusmari.geronimo@xxxxxxxxxx/
- dt-bindings: add Krzysztof Kozlowski's Reviewed-by.
- driver: set psy_cfg.fwnode so that the power supply gets a firmware
node (sashiko-bot).
Tested on a DC2703A-A-KIT evaluation board with a Raspberry Pi 4B
(6.12-based vendor kernel) with no battery connected; charging was not
tested, nor was the -ENODATA handling of the not-measured and
thermistor-disconnected temperature values. Build-tested against the
power-supply for-next tree.
John Erasmus Mari Geronimo (2):
dt-bindings: power: supply: add adi,lt8491.yaml
power: supply: add LT8491 battery charger driver
.../bindings/power/supply/adi,lt8491.yaml | 92 ++++
MAINTAINERS | 7 +
drivers/power/supply/Kconfig | 9 +
drivers/power/supply/Makefile | 1 +
drivers/power/supply/lt8491_charger.c | 430 ++++++++++++++++++
5 files changed, 539 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/supply/adi,lt8491.yaml
create mode 100644 drivers/power/supply/lt8491_charger.c
base-commit: 7071d4750856abbc68dfe431acc58a1d45dd42e8
--
2.34.1