Re: [PATCH 1/7] Bluetooth: add a quirk for controllers that cannot enable Secure Connections
From: Yang Li
Date: Tue Nov 10 2026 - 04:14:29 EST
Hi,
I updated the w155s2 firmware bin in linux-firmware.
See the link below.
https://lore.kernel.org/all/20261110-upgrade_w155s2_bin-v1-1-4533ba6005cd@xxxxxxxxxxx/
On 11/5/26 10:19, Yang Li wrote:
This appears to be an anomaly with the firmware binary. Could you
provide the FW version in use? It is logged during Bluetooth driver
initialization.
Hi Yang,
the controller reports
fw_version: date = 09.08, number = 0x15d2
The firmware is not the linux-firmware one: aml_w155s2_bt_uart.bin from
linux-firmware downloads without errors on this board and then never
starts (no HCI event after the download). The one that works is the
firmware embedded in the vendor Android libbt-vendor_aml.so of this box
(X98Q, S905W2), 0x60000 bytes. I load it as aml_w1_bt_uart.bin.
If there is a newer firmware without this behaviour, I would be glad to
test it, and if it fixes it I would rather drop the quirk than add it.
Is the linux-firmware image meant for this chip revision, or should it
start as well?
Kind regards,
Christian K.-D.