Re: [PATCH v3 0/4] arm64: dts: freescale: Add Verdin iMX8M OV5640 camera overlays

[Francesco Dolcini]

Hello all,

On Thu, Oct 22, 2026 at 04:31:24PM +0200, Ernest Van Hoecke wrote:
> Following feedback on the Verdin iMX8M Mini series, introduce a binding
> for the connector's sideband GPIO nexus. Add connector mappings to the
> carrier descriptions and stable labels for the SoM-specific CSI media
> nodes. This allows one pair of OV5640 overlays to be shared by both SoMs
> and all three carrier boards.
> 
> The binding intentionally covers only the connector's GPIO signals.
> MIPI CSI-2 endpoints, I2C, clocks and supplies continue to use their
> existing bindings and are connected through stable labels in the Verdin
> device trees.

We have now an official page documenting this connector

Link: https://developer.toradex.com/hardware/hardware-resources/peripherals/toradex-camera-connector/

Ernest: if there is a new patch series, I would mention it.
Kieran: the danger note in the page is for you ;-)

Francesco