Re: [PATCH v4 4/4] perf test: Don't starve per-process tests with system-wide events
From: James Clark
Date: Tue Nov 10 2026 - 07:47:39 EST
On 09/11/2026 17:47, Ian Rogers wrote:
On Mon, Nov 9, 2026 at 5:48 AM James Clark <james.clark@xxxxxxxxxx> wrote:
Some tests intermittently fail when run in parallel, for example "Check
branch stack sampling" fails with no branches recorded at all.
The default event is cycles:P which there may only be 1 or 2 HW counters
for on Intel because it's precise. System wide or per-core precise
events hog the HW counter leaving other per-process tests with no
samples. Rather than make all the tests that use default record commands
run serially, just make the system wide ones use a software event which
has the greatest possible compatibility. They don't need precise
sampling or HW counters anyway. The per-process tests can be left alone
as their events/processes never run concurrently on any one core.
The LBR filter is another resource shared by all events on a CPU, and
the system-wide LBR test uses different filters to the per-process
branch stack test, so mark the LBR test as exclusive.
Thanks for deflaking the tests! Making the LBR test exclusive is
pragmatic; however, it also feels like a shame since recording LBR
data in parallel should be something we expect users to do.
For PMUs that can have a single user we have logic which prints
conflicting users in dump_perf_event_processes:
https://web.git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/perf/util/evsel.c?h=perf-tools-next#n4519
I wonder if, when we get zero counts or no samples we could perform a
similar analysis and report conflicting users—though this would
inherently be racy. If we had that, maybe we could just repeat the LBR
tests until there are no conflicting users and not need the exclusive
tag.
Yeah re-running the test for certain failures would probably work well. But at the same time if we know certain resources are limited and we're running per-CPU and per-thread events at the same time in a way that we know won't multiplex at all, maybe it would be better to re-write the parallel tests to only use per-thread events.
Even when multiplexing works there can be issues. For example another flake I looked at was in the metrics tests. Some of them test that the ratios don't exceed 100% for example, but multiplexing can break this assumption if all the counters in the metric are only in a weak group and they aren't always scheduled at the same time. There was a lot to unpick in that one so I dropped it. But it's a similar problem.
I think some of the kernel PMU scheduling and sharing decisions expect that any root user running things per-CPU is "well behaved" or understands the impact to other users that their events might have. And we're probably not doing that enough in the tests to honor that.
Another example for this is with Arm BRBE. There are multiple counters on the PMU, so you can have multiple events, but there's only one BRBE and one filter, and the branch history is limited. The driver takes the union of filters for all the PMU events running and then post processes the branch buffer for each user to not leak anything from the other event's filter. But imagine that one test gives a certain restricted filter and expects to completely fill up the branch buffer, and that exact full buffer is required for the test. When another root event runs in parallel on the same core, the filter can be widened and the buffer gets blown up with other branches that weren't interesting to the other test, and are filtered out by the driver anyway making it fail.
Anyway, doing all of that is a bigger project.
Yep. and maybe something to keep in mind for any new tests or when doing further flake investigations.
Reviewed-by: Ian Rogers <irogers@xxxxxxxxxx>
Thanks!
Thanks,
Ian
This fixes the "Check branch stack sampling" test and other flakes when
a system-wide record from another test runs at the same time, for
example:
$ sudo perf record -a -o /dev/null -- sleep 30 &
$ sudo perf test -vvv "Check branch stack sampling"
...
Testing user branch stack sampling
ERROR: Branches missing ^brstack_bench\+[^ ]*/brstack_foo\+[^ ]*/IND_CALL/.*$
...
Testing user branch stack sampling [Failed]
...
Testing branch stack filtering permutation (call,CALL|SYSCALL)
Testing branch stack filtering [Failed empty script output]
...
---- end(-1) ----
138: Check branch stack sampling : FAILED!
Signed-off-by: James Clark <james.clark@xxxxxxxxxx>
---
tools/perf/tests/shell/record.sh | 6 +++---
tools/perf/tests/shell/record_lbr.sh | 2 +-
tools/perf/tests/shell/record_sideband.sh | 4 ++--
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/tools/perf/tests/shell/record.sh b/tools/perf/tests/shell/record.sh
index 01dc3e22fa73..e4789e2bcf43 100755
--- a/tools/perf/tests/shell/record.sh
+++ b/tools/perf/tests/shell/record.sh
@@ -388,7 +388,7 @@ test_system_wide() {
echo "Basic --system-wide mode test"
local ret=0
perf_record_with_retry "${perfdata}" "check_system_wide" "perf test -w thloop" \
- -aB --synth=no || ret=$?
+ -aB --synth=no -e cpu-clock || ret=$?
if [ $ret -eq 2 ]; then
echo "System-wide record [Skipped not supported]"
return
@@ -471,7 +471,7 @@ test_cgroup() {
echo "Cgroup sampling test"
local ret=0
perf_record_with_retry "${perfdata}" "check_cgroup" "perf test -w thloop" \
- -aB --synth=cgroup --all-cgroups || ret=$?
+ -aB --synth=cgroup --all-cgroups -e cpu-clock || ret=$?
if [ $ret -eq 2 ]; then
echo "Cgroup sampling [Skipped not supported]"
return
@@ -491,7 +491,7 @@ test_uid() {
echo "Uid sampling test"
local ret=0
perf_record_with_retry "${perfdata}" "check_uid" "perf test -w thloop" \
- -aB --synth=no --uid "$(id -u)" || ret=$?
+ -aB --synth=no --uid "$(id -u)" -e cpu-clock || ret=$?
if [ $ret -eq 2 ]; then
local logfile="${PERF_RECORD_LOGS[${#PERF_RECORD_LOGS[@]}-1]}"
if grep -q -E "libbpf.*EPERM|Access to performance monitoring" "$logfile" || \
diff --git a/tools/perf/tests/shell/record_lbr.sh b/tools/perf/tests/shell/record_lbr.sh
index 8d51afeb437b..6b6af59db871 100755
--- a/tools/perf/tests/shell/record_lbr.sh
+++ b/tools/perf/tests/shell/record_lbr.sh
@@ -1,6 +1,6 @@
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
-# perf record LBR tests
+# perf record LBR tests (exclusive)
set -e
diff --git a/tools/perf/tests/shell/record_sideband.sh b/tools/perf/tests/shell/record_sideband.sh
index 2182551873be..f16889e3fa9a 100755
--- a/tools/perf/tests/shell/record_sideband.sh
+++ b/tools/perf/tests/shell/record_sideband.sh
@@ -22,7 +22,7 @@ trap trap_cleanup EXIT TERM INT
can_cpu_wide()
{
- if ! perf record -o ${perfdata} -BN --no-bpf-event -C $1 true > /dev/null 2>&1
+ if ! perf record -o ${perfdata} -BN --no-bpf-event -e cpu-clock -C $1 true > /dev/null 2>&1
then
echo "record sideband test [Skipped cannot record cpu$1]"
err=2
@@ -39,7 +39,7 @@ test_system_wide_tracking()
can_cpu_wide 1 || return 0
# Record on CPU 0 a task running on CPU 1
- perf record -BN --no-bpf-event -o ${perfdata} -C 0 -- taskset --cpu-list 1 true
+ perf record -BN --no-bpf-event -e cpu-clock -o ${perfdata} -C 0 -- taskset --cpu-list 1 true
# Should get MMAP events from CPU 1
mmap_cnt=`perf script -i ${perfdata} --show-mmap-events -C 1 2>/dev/null | grep MMAP | wc -l`
--
2.43.0