[PATCH] comedi: amplc_pci230: Correct driver comment for AI EXT_TRIG support

From: Ian Abbott

Date: Tue Nov 10 2026 - 07:58:13 EST


Correct "Note 2" for "AI Commands" in the driver description comment
block. It is the PCI260 that does not support scan_begin_src ==
TRIG_EXT, not the PCI230. (The PCI260+ also supports it.) This matches
the comment in pci230_ai_cmdtest().

Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
---
drivers/comedi/drivers/amplc_pci230.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/comedi/drivers/amplc_pci230.c b/drivers/comedi/drivers/amplc_pci230.c
index aa9c502b94293..4064209b1232f 100644
--- a/drivers/comedi/drivers/amplc_pci230.c
+++ b/drivers/comedi/drivers/amplc_pci230.c
@@ -15,7 +15,7 @@
* Author: Allan Willcox <allanwillcox@xxxxxxxxxxxxxx>,
* Steve D Sharples <steve.sharples@xxxxxxxxxxxxxxxx>,
* Ian Abbott <abbotti@xxxxxxxxx>
- * Updated: Mon, 01 Sep 2014 10:09:16 +0000
+ * Updated: Tue, 10 Nov 2026 11:46:50 +0000
* Devices: [Amplicon] PCI230 (amplc_pci230), PCI230+, PCI260, PCI260+
* Status: works
*
@@ -87,7 +87,7 @@
* Note 2: For PCI230 and PCI230+, scan_begin_src == TRIG_EXT uses
* DIO channel 16 (pin 49) which will need to be configured as
* a digital input. For PCI260+, the EXTTRIG/EXTCONVCLK input
- * (pin 17) is used instead. For PCI230, scan_begin_src ==
+ * (pin 17) is used instead. For PCI260, scan_begin_src ==
* TRIG_EXT is not supported. The trigger is a rising edge
* on the input.
*
--
2.53.0