Re: [PATCH] remoteproc: imx_rproc: revert channel freeing order in imx_rproc_free_mbox

From: Peng Fan

Date: Tue Nov 10 2026 - 09:46:26 EST


On Tue, Nov 10, 2026 at 01:29:08PM +0100, Richard Leitner wrote:
>The imx_rproc driver is affected by a race condition in the shutdown
>ordering in imx_rproc_free_mbox(). A received message might cause a
>virtqueue_kick resulting in tx_ch access. When imx_rproc_free_mbox() is
>triggered between the if (!priv->tx_ch) check and the mbox_send_message()
>call in the imx_rproc_kick() function the mbox_send_message() then tries
>to dereference a NULL pointer on the tx_ch (as seen in the call trace
>below).
>
>Therefore fix this behaviour by first freeing the rx channel, so no new
>messages are received and therefore no kicking on tx_ch can happen.
>Afterwards release the tx channel.
>
>This problem was encountered on a fleet of i.MX8MP devices on about 1 in
>500 system shutdowns, resulting in Oops below. This Oops was recorded
>from a v7.3.0 kernel before the work-queue removal.
>
> remoteproc remoteproc0: stopped remote processor imx8mp-cm7
> Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
> Internal error: Oops: 0000000096000004 [#1] SMP
> CPU: 0 UID: 0 PID: 32710 Comm: kworker/0:1 Not tainted 7.3.0-XXX #1 PREEMPT
> Hardware name: XXX (DT)
> Workqueue: imx8mp-cm7 imx_rproc_vq_work [imx_rproc]
> pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> pc : mbox_send_message+0x8c/0x178
> lr : mbox_send_message+0x88/0x178
> sp : ffff8000897f3b70
> x29: ffff8000897f3b70 x28: ffff80007a07b248 x27: ffff0000d90e1a20
> x26: ffff80007a07b328 x25: ffff0000c1d31300 x24: ffff0000d90e1a40
> x23: 0000000000000001 x22: 0000000000000005 x21: ffff8000897f3ba4
> x20: 000000000000000b x19: ffff0000c1b24240 x18: 0000000000000000
> x17: ffff80006a453000 x16: ffff800081ac8000 x15: 0000000000000000
> x14: 0000000000000040 x13: 0000000000000228 x12: ffff0000c115a3e8
> x11: 0000000000000000 x10: 0000000000000001 x9 : ffff800080cd6570
> x8 : ffff8000897f3ba0 x7 : 0000000000000002 x6 : 0000000000000000
> x5 : 000000000000000c x4 : 0000000004400000 x3 : 0000000000000000
> x2 : 0000000000000000 x1 : ffff0000cb268000 x0 : 0000000000000000
> Call trace:
> mbox_send_message+0x8c/0x178 (P)
> imx_rproc_kick+0x50/0xc0 [imx_rproc]
> rproc_virtio_notify+0x3c/0xa0
> virtqueue_kick+0x4c/0x68
> rpmsg_recv_done+0x224/0x658 [virtio_rpmsg_bus]
> vring_interrupt+0xbc/0x158
> rproc_vq_interrupt+0x40/0xb0
> imx_rproc_notified_idr_cb+0x20/0x40 [imx_rproc]
> idr_for_each+0x74/0x100
> imx_rproc_vq_work+0x2c/0x40 [imx_rproc]
> process_one_work+0x194/0x520
> worker_thread+0x19c/0x320
> kthread+0x134/0x148
> ret_from_fork+0x10/0x20
> Code: 37f80574 aa1303e0 97ffff39 f9400a60 (39402001)
>
>Fixes: 99b142cf7191 ("remoteproc: imx_rproc: Request mbox channel later")
>Cc: stable@xxxxxxxxxxxxxxx
>Signed-off-by: Richard Leitner <richard.leitner@xxxxxxxxx>

LGTM:

Reviewed-by: Peng Fan <peng.fan@xxxxxxx>

BTW: would you plan to fix the other issue that sashiko reported
regarding imx_rproc_xtr_mbox_init()?

Regards
Peng