Re: [PATCH v4 0/2] Bluetooth: hci_qca: Reopen the UART after enabling QCA2066

[patchwork-bot+bluetooth]

Hello:

This series was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx>:

On Tue, 10 Nov 2026 17:29:27 +0800 you wrote:
> QCA2066 does not reopen the UART after the controller is enabled, which
> causes RX/TX out-of-sync errors. The UART has to be reopened once the
> controller is powered on.
> 
> qca_regulator_init() already enables the controller and then reopens the
> UART, but QCA2066 does not go through it. QCA2066 was added with its own
> SoC type and handled in the default case.
> 
> [...]

Here is the summary with links:
  - [v4,1/2] Bluetooth: hci_qca: Reopen the UART after enabling QCA2066
    https://git.kernel.org/bluetooth/bluetooth-next/c/a57a255ce204
  - [v4,2/2] Bluetooth: hci_qca: Don't use the serdev port after a failed reopen
    https://git.kernel.org/bluetooth/bluetooth-next/c/45e28b01e4d0

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html