[PATCH 6/7] pinctrl: airoha: move the GPIO register offsets to the common header

[John Crispin]

The GPIO register offsets are private to pinctrl-airoha.c, which builds
the shared 64 pin register table from them. A SoC with more GPIO banks
needs its own table, built from the same offsets and its own for the
extra banks.

Move the offsets to airoha-common.h so the SoC drivers can use them.

No functional change.

Signed-off-by: John Crispin <john@xxxxxxxxxxx>
---
 drivers/pinctrl/airoha/airoha-common.h  | 20 ++++++++++++++++++++
 drivers/pinctrl/airoha/pinctrl-airoha.c | 20 --------------------
 2 files changed, 20 insertions(+), 20 deletions(-)

diff --git a/drivers/pinctrl/airoha/airoha-common.h b/drivers/pinctrl/airoha/airoha-common.h
index adfce89493f0..dc9b897ea77c 100644
--- a/drivers/pinctrl/airoha/airoha-common.h
+++ b/drivers/pinctrl/airoha/airoha-common.h
@@ -34,6 +34,26 @@
 #include "../pinconf.h"
 #include "../pinmux.h"
 
+/* GPIOs */
+#define REG_GPIO_CTRL				0x0000
+#define REG_GPIO_DATA				0x0004
+#define REG_GPIO_INT				0x0008
+#define REG_GPIO_INT_EDGE			0x000c
+#define REG_GPIO_INT_LEVEL			0x0010
+#define REG_GPIO_OE				0x0014
+#define REG_GPIO_CTRL1				0x0020
+#define REG_GPIO_CTRL2				0x0060
+#define REG_GPIO_CTRL3				0x0064
+#define REG_GPIO_DATA1				0x0070
+#define REG_GPIO_OE1				0x0078
+#define REG_GPIO_INT1				0x007c
+#define REG_GPIO_INT_EDGE1			0x0080
+#define REG_GPIO_INT_EDGE2			0x0084
+#define REG_GPIO_INT_EDGE3			0x0088
+#define REG_GPIO_INT_LEVEL1			0x008c
+#define REG_GPIO_INT_LEVEL2			0x0090
+#define REG_GPIO_INT_LEVEL3			0x0094
+
 #define AIROHA_NUM_PINS				64
 #define AIROHA_PIN_BANK_SIZE			(AIROHA_NUM_PINS / 2)
 #define AIROHA_REG_GPIOCTRL_NUM_PIN		(AIROHA_NUM_PINS / 4)
diff --git a/drivers/pinctrl/airoha/pinctrl-airoha.c b/drivers/pinctrl/airoha/pinctrl-airoha.c
index a805f542bc7b..8f901f251c00 100644
--- a/drivers/pinctrl/airoha/pinctrl-airoha.c
+++ b/drivers/pinctrl/airoha/pinctrl-airoha.c
@@ -7,26 +7,6 @@
 
 #include "airoha-common.h"
 
-/* GPIOs */
-#define REG_GPIO_CTRL				0x0000
-#define REG_GPIO_DATA				0x0004
-#define REG_GPIO_INT				0x0008
-#define REG_GPIO_INT_EDGE			0x000c
-#define REG_GPIO_INT_LEVEL			0x0010
-#define REG_GPIO_OE				0x0014
-#define REG_GPIO_CTRL1				0x0020
-#define REG_GPIO_CTRL2				0x0060
-#define REG_GPIO_CTRL3				0x0064
-#define REG_GPIO_DATA1				0x0070
-#define REG_GPIO_OE1				0x0078
-#define REG_GPIO_INT1				0x007c
-#define REG_GPIO_INT_EDGE1			0x0080
-#define REG_GPIO_INT_EDGE2			0x0084
-#define REG_GPIO_INT_EDGE3			0x0088
-#define REG_GPIO_INT_LEVEL1			0x008c
-#define REG_GPIO_INT_LEVEL2			0x0090
-#define REG_GPIO_INT_LEVEL3			0x0094
-
 #define airoha_pinctrl_get_pullup_conf(pinctrl, pin, val)			\
 	airoha_pinctrl_get_conf((pinctrl), AIROHA_PINCTRL_CONFS_PULLUP,		\
 				(pin), (val))
-- 
2.34.1