Re: [PATCH] mmc: dw_mmc: enable MMC_CAP_DONE_COMPLETE

[Marek Szyprowski]

On 13.10.2026 09:24, Shawn Lin wrote:
> All requests issued by dw_mmc are completed from dw_mci_work_func(),
> which runs from the system_bh_wq workqueue. It is therefore preemptible
> context and host->lock is dropped before the completion, see
> mmc_request_done() in dw_mci_request_end().
>
> The dw_mci_interrupt and the dw_mci_watchdog_fn never call mmc_request_done()
> directly. So every request is completed from a sleepable context with no
> spinlock held.
>
> This is exactly the contract required by MMC_CAP_DONE_COMPLETE, which was
> introduced for hosts that can complete requests within mmc_request_done()
> without deferring to the core's complete_work.
>
> Without the flag, the core records the finished request in
> mq->complete_req and queues mq->complete_work, i.e. a second workqueue
> dispatch plus an extra context switch per request. With the flag,
> mmc_blk_mq_req_done() completes the request directly via
> mmc_blk_mq_post_req() -> blk_mq_complete_request(), and a following
> request completes the previous one inline from mmc_blk_rw_wait().
>
> Measured on an RK3576 SD card (dw_mmc) with:
>
>   perf record -a -g -F 999 -- sleep 30
>   perf report --stdio -g graph,0.5,caller
>
> fio: 4k randread, ioengine=libaio
>
> Without the flag, the completion hot path is:
>
>   mmc_request_done -> mmc_blk_mq_req_done -> queue_work_on      (~4.3%)
>   ... -> mmc_blk_mq_complete_work            (kworker/5:1H-mm, ~18.4%)
>        -> mmc_blk_mq_complete_prev_req -> mmc_blk_mq_post_req
>
> with the flag the workqueue round trip disappears completely: there is no
> queue_work_on and no mmc_blk_mq_complete_work in the profile anymore, and
> the previous request is completed inline:
>
>   mmc_blk_mq_issue_rq -> mmc_blk_mq_post_req -> mmc_blk_mq_complete_rq
>                                                   -> __blk_mq_end_request
>
> This can remove a redundant workqueue dispatch and context switch per completed
> request.
>
> Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>


This patch landed yesterday in linux-next as commit 80636b762eec ("mmc: dw_mmc:
enable MMC_CAP_DONE_COMPLETE"). In my tests I found that it causes serious
problems. I found that it is responsible for corrupting root filesystem and/or
journal.
Reverting this on top of linux-next fixes the issue. Unfortunately I didn't find
what mmc access pattern causes the corruption, but running my tests and rebooting
boards 2 or 3 times usually ended in breaking it.


There must some corner case missed in the analysis behind this patch.



> ---
>
>  drivers/mmc/host/dw_mmc.c | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index ff0b25d..bec777b 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -2945,6 +2945,8 @@ static int dw_mci_init_host_caps(struct dw_mci *host)
>  	if (mmc->caps & MMC_CAP_SDIO_IRQ)
>  		mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
>  
> +	mmc->caps |= MMC_CAP_DONE_COMPLETE;
> +
>  	return 0;
>  }
>  

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland