[PATCH v3 0/2] arm64: dts: qcom: nord: Add ADC-TM thermistor channels

[Shawn Guo]

Add the three board thermistors wired to PMAU0102 (Kai_MV) AMUX pins on
Nord Ride and RRD: SDRAM3 (Kai E AMUX1), SDRAM1 (Kai I AMUX1)
and UFS (Kai I AMUX2).

Changes for v3:
- Rebase on next-20261110
- Drop RFC tag as the dependency is cleared
- Link to v2: https://lore.kernel.org/all/20261103135445.2049110-1-shengchao.guo@xxxxxxxxxxxxxxxx/

Changes for v2:
- Move thermistor channels and thermal zones from pmau0102-nord.dtsi
  to board DTS
- Keep #thermal-sensor-cells in pmau0102-nord.dtsi and set it for
  all Kai ADC instances
- Rename thermal zones to sdram3/sdram1/ufs-thermal
- Link to v1: https://lore.kernel.org/all/20261028150103.520428-1-shengchao.guo@xxxxxxxxxxxxxxxx/

Dhruvin Rajpura (1):
  arm64: dts: qcom: nord-ride-embedded: Add PMIC ADC thermistor channels

Shawn Guo (1):
  arm64: dts: qcom: nord-rrd: Add PMIC ADC thermistor channels

 .../boot/dts/qcom/nord-ride-embedded.dts      | 84 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/nord-rrd.dts         | 84 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/pmau0102-nord.dtsi   |  8 ++
 3 files changed, 176 insertions(+)

-- 
2.43.0