[PATCH v2 3/4] MIPS: dts: Add Siflower SF19A2890 and GL.iNet GL-SFT1200

[Joseph Telaak via B4 Relay]

From: Joseph Telaak <joseph@xxxxxxxxxx>

Add a device tree for the Siflower SF19A2890 with its four interAptiv
CPUs (two cores with two VPEs each), the MIPS GIC and its timer, and
the PL011 UART that serves as the console, and one for the GL.iNet
GL-SFT1200 travel router built on it.

The SoC's clock controller has no driver yet, so fixed clocks stand
in for the rates the bootloader programs: 800 MHz for the CPU (and so
for the GIC timer), 100 MHz for the peripheral bus and 125 MHz for
the UART.

Signed-off-by: Joseph Telaak <joseph@xxxxxxxxxx>
---
 MAINTAINERS                                        |  1 +
 arch/mips/boot/dts/Makefile                        |  1 +
 arch/mips/boot/dts/siflower/Makefile               |  2 +
 .../dts/siflower/sf19a2890-glinet-gl-sft1200.dts   | 27 ++++++
 arch/mips/boot/dts/siflower/sf19a2890.dtsi         | 97 ++++++++++++++++++++++
 5 files changed, 128 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 3aa80a8dd785..23ad08c7d8d1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -25703,6 +25703,7 @@ M:	Joseph Telaak <joseph@xxxxxxxxxx>
 L:	linux-mips@xxxxxxxxxxxxxxx
 S:	Maintained
 F:	Documentation/devicetree/bindings/mips/siflower.yaml
+F:	arch/mips/boot/dts/siflower/
 F:	arch/mips/include/asm/mach-siflower/
 N:	sf19a2890
 
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index 36c5e4c6e640..d33cf7f61aa7 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -14,4 +14,5 @@ subdir-y	+= pic32
 subdir-y	+= qca
 subdir-y	+= ralink
 subdir-y	+= realtek
+subdir-y	+= siflower
 subdir-y	+= xilfpga
diff --git a/arch/mips/boot/dts/siflower/Makefile b/arch/mips/boot/dts/siflower/Makefile
new file mode 100644
index 000000000000..b5986850aaa0
--- /dev/null
+++ b/arch/mips/boot/dts/siflower/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+dtb-$(CONFIG_MACH_SIFLOWER_MIPS)	+= sf19a2890-glinet-gl-sft1200.dtb
diff --git a/arch/mips/boot/dts/siflower/sf19a2890-glinet-gl-sft1200.dts b/arch/mips/boot/dts/siflower/sf19a2890-glinet-gl-sft1200.dts
new file mode 100644
index 000000000000..13e6a0c8be27
--- /dev/null
+++ b/arch/mips/boot/dts/siflower/sf19a2890-glinet-gl-sft1200.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "sf19a2890.dtsi"
+
+/ {
+	model = "GL.iNet GL-SFT1200";
+	compatible = "glinet,gl-sft1200", "siflower,sf19a2890";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x8000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/siflower/sf19a2890.dtsi b/arch/mips/boot/dts/siflower/sf19a2890.dtsi
new file mode 100644
index 000000000000..1c342cbaa8ba
--- /dev/null
+++ b/arch/mips/boot/dts/siflower/sf19a2890.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
+/ {
+	compatible = "siflower,sf19a2890";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/*
+	 * The bootloader sets up these clocks. They stand in for the system
+	 * clock controller until it has a driver.
+	 */
+	pbus_clk: clock-100000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	uart_clk: clock-125000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	cpu_clk: clock-800000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <800000000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "mti,interaptiv";
+			reg = <0>;
+			clocks = <&cpu_clk>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "mti,interaptiv";
+			reg = <1>;
+			clocks = <&cpu_clk>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "mti,interaptiv";
+			reg = <2>;
+			clocks = <&cpu_clk>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "mti,interaptiv";
+			reg = <3>;
+			clocks = <&cpu_clk>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&gic>;
+
+		uart0: serial@18300000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x18300000 0x1000>;
+			interrupts = <GIC_SHARED 226 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&pbus_clk>;
+			clock-names = "uartclk", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@1bdc0000 {
+			compatible = "mti,gic";
+			reg = <0x1bdc0000 0x20000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			mti,reserved-ipi-vectors = <0 8>;
+
+			timer {
+				compatible = "mti,gic-timer";
+				interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+				clocks = <&cpu_clk>;
+			};
+		};
+	};
+};

-- 
Git-155)