Re: [PATCH v7 1/2] dt-bindings: usb: Add CIX Sky1 USBSSP controller

From: Krzysztof Kozlowski

Date: Wed Nov 11 2026 - 03:48:54 EST


On Fri, Nov 06, 2026 at 06:12:09PM +0800, Hongliang Yang wrote:
> Add device tree binding for the CIX Sky1 Cadence USBSSP controller.
> Each instance wraps one of the two USB3 Type-A DRD controllers of the
> SoC and owns a register range in the USB30 Type-A DRD RCSU block at
> 0x091c0000:
>
> offset register contents controller
> 0x0300 STRAP_PIN0 stream ID (SID/SSID) USB4
> 0x0304 STRAP_PIN1 stream ID (SID/SSID) USB5
> 0x030c STRAP_PIN3 clock enables, ctrl and PHYs USB4, USB5
> 0x0314 STRAP_PIN5 awcache[3:0], arcache[7:4] USB4
> 0x0324 STRAP_PIN9 awcache[3:0], arcache[7:4] USB5
> 0x0328 STRAP_PIN10 USB2 PLL controls USB4
> 0x0400 STRAP_STATUS0 AXI clock enable/valid/req USB4
> 0x0410 STRAP_STATUS4 AXI clock enable/valid/req USB5
>
> Controller 0 of the block is used by USB4, controller 1 is used by
> USB5. The range of each instance starts at its own AXI cache attribute
> strap register and ends after its own AXI clock status register, so the
> two ranges overlap: the strap and status registers of the two
> controllers are interleaved in the block.
>
> The Cadence USBSSP core itself is described by a child node at its own
> address. Mode strap controls are programmed through the Sky1 S5 system
> controller referenced by the cix,usb-syscon phandle, whose arguments
> give the register offset and the bit position of the strap field.
>
> Signed-off-by: Hongliang Yang <hongliang.yang@xxxxxxxxxxx>
> ---

Unanswered comments from Sashiko, dropping from DT Patchwork.

Best regards,
Krzysztof