RE: [PATCH net-next v3 2/5] net: enetc: Enable probing of version 4.4 devices
From: Claudiu Manoil
Date: Wed Nov 11 2026 - 04:00:43 EST
From: Simon Horman <horms@xxxxxxxxxx>
Sent: Monday, November 9, 2026 7:37 PM
> To: Claudiu Manoil <claudiu.manoil@xxxxxxx>
[...]
> Subject: Re: [PATCH net-next v3 2/5] net: enetc: Enable probing of version 4.4
> devices
>
> On Tue, Nov 03, 2026 at 04:09:08PM +0200, Claudiu Manoil wrote:
> > The ENETC v4.4 devices are present on S32N79 SoCs and feature only
> > Pseudo-MAC ENETC ports, whose PFs use either the 0xe101 or the 0xe110
> > PCI device ID, and the VFs answer to the usual device ID of 0xef00.
> >
> > While the ENETC PF instances are usually designated by the 0xe101 ID,
> > in newer IP versions the 0xe110 ID was introduced to indicate the
> > power-on reset default NETC switch management interface. These IDs do
> > not indicate any functional difference between the designated ENETC
> > instances, and can be interchanged and re-assigned at boot time (i.e.
> > from firmware).
> >
> > Signed-off-by: Claudiu Manoil <claudiu.manoil@xxxxxxx>
> > ---
> > v3:
> > - Added sysclk_freq info for the v4.4 ENETC devices.
> >
> > v2:
> > - Described why there are two ENETC PF IDs in the commit message, as per
> > review.
>
> I realise this was forwarded somewhere by an automation, but it seems not to
> the full CC list, so I'm reproducing it here:
>
> commit 6de2e15f2fb313f3ab9a84d0bfd5a867de11c72c
> Author: Claudiu Manoil <claudiu.manoil@xxxxxxx>
>
> net: enetc: Enable probing of version 4.4 devices
>
> This commit adds driver data and platform info entries for ENETC v4.4 PF and
> VF devices on S32N79 SoCs with a 500 MHz system clock frequency.
>
Will add this line to the commit message.
> > diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c
> b/drivers/net/ethernet/freescale/enetc/enetc.c
> > index c6571b5cc8425..b989823859ff2 100644
> > --- a/drivers/net/ethernet/freescale/enetc/enetc.c
> > +++ b/drivers/net/ethernet/freescale/enetc/enetc.c
>
[...]
> Can probing ENETC v4.4 on an 8-core S32N79 SoC overflow priv->int_vector[] in
> enetc_int_vector_init()?
>
I already have a downstream 'fix' for this, where int_vector is allocated dynamically.
I'm going to include it in the v4 patchset. Since this issue only affects the new chip
(S32N79), it's not a 'net' kind of fix.
[...]
>
> Link:
[...]
>
> This does seem to be a legitimate concern to me, and I think it warrants a v4.
>
> There is also a review of patch 1/5, here, which I think warrants investigation too.
>
> Link:
[...]
Thanks for sharing the links, I wasn't aware that Sashiko already scrutinized v3.
Regards
Claudiu