Re: [PATCH v5 5/6] arm64: dts: ti: k3-j784s4-j742s2-ti-ipc-firmware-common: Reserve memory for LPM metadata

From: Kumar, Udit

Date: Wed Nov 11 2026 - 04:29:29 EST




On 10/21/2026 1:39 PM, Richard Genoud (TI) wrote:
> Declare a carveout memory region to store LPM metadata on J784S4 and
> J742S2.
>
> For Jacinto devices, this memory region is needed for saving ATF context
> and the certificate information of ATF and OPTEE and DM image. This LPM
> metadata area is firewalled to be accessed only by TIFS.
>
> U-Boot R5 SPL/TIFS will use this area to save and restore:
> - ATF context
> - ATF certificate information
> - OPTEE certificate information
> - DM image (which has been copied in memory at boot time by U-Boot
> R5-SPL)
>
> At resume, U-Boot R5 SPL is executed and detects that the board is
> resuming (with a flag set in the PMIC), then it:
> - brings out of retention the DDR
> - retrieves the LPM memory region from DTS
> - authenticates certificates from LPM memory region and applies firewalls
> - asks TIFS to restore TFA and its own minimal context
> - starts TFA on remote proc
> - loads back DM image from memory and jumps to DM
>
> https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/pm/lpm.html#lpm-msg-lpm-save-addr
>
> As this is used by U-Boot SPL, bootph-pre-ram is added.
>
> NB: This memory region is not part of DM memory (which is not retained
> at suspend)
>
> Suggested-by: Udit Kumar <u-kumar1@xxxxxx>
> Signed-off-by: Prasanth Babu Mantena <p-mantena@xxxxxx>
> Signed-off-by: Richard Genoud (TI) <richard.genoud@xxxxxxxxxxx>
> ---
> .../ti/k3-j784s4-j742s2-ti-ipc-firmware-common.dtsi | 12 ++++++++++--
> 1 file changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-ti-ipc-firmware-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-ti-ipc-firmware-common.dtsi
> index d08fd3ff8a89..51b2d11ab5d6 100644
> --- a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-ti-ipc-firmware-common.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-ti-ipc-firmware-common.dtsi
> @@ -6,6 +6,12 @@
> */
>
> &reserved_memory {
> + lpm_memory_region: memory@9e500000 {
> + reg = <0x00 0x9e500000 0x00 0x00300000>;
> + no-map;
> + bootph-pre-ram;
> + };
> +
> mcu_r5fss0_core1_dma_memory_region: memory@a1000000 {
> compatible = "shared-dma-pool";
> reg = <0x00 0xa1000000 0x00 0x100000>;
> @@ -261,8 +267,10 @@ &mcu_r5fss0_core0 {
> status = "okay";
> mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
> memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
> - <&mcu_r5fss0_core0_memory_region>;
> - memory-region-names = "dma", "firmware";
> + <&mcu_r5fss0_core0_memory_region>,
> + <&lpm_memory_region>;
> + memory-region-names = "dma", "firmware", "lpm-metadata";
> + bootph-pre-ram;


Reviewed-by: Udit Kumar <u-kumar1@xxxxxx>


> };
>
> &mcu_r5fss0_core1 {