Re: [PATCH] arm64: dts: rockchip: Describe the Type-C port on RK3576 EVB1
From: Chaoyi Chen
Date: Wed Nov 11 2026 - 04:40:22 EST
Hi Alexey,
On 11/7/2026 1:52 AM, Alexey Charkov wrote:
> RK3576 EVB1 has its USBDP PHY routed to a Type-C port with a HUSB311 CC
> controller and a fixed-voltage VBUS supply.
>
> Describe it in the device tree, including the wiring for both the USB and
> the DP side.
>
> This makes the data roles follow the Type-C port's negotiation, so the
> port stops being host only. It also leaves the VBUS regulator to be
> managed by TCPM instead of being hardwired via the tangentially related
> phy-supply on a USB controller. DP lanes are also muxed dynamically by
> the USBDP PHY based on the Type-C port's negotiation, so the hacky fixed
> lane muxing also goes away.
>
Have you tested this? As far as I know, dw-dp driver does not support
Type-C HPD yet.
> Signed-off-by: Alexey Charkov <alchark@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts | 150 ++++++++++++++++++++++-
> 1 file changed, 147 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts
> index f83d129f96f1..a9b27cdb2dfa 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts
> @@ -11,6 +11,7 @@
> #include <dt-bindings/leds/common.h>
> #include <dt-bindings/pinctrl/rockchip.h>
> #include <dt-bindings/soc/rockchip,vop2.h>
> +#include <dt-bindings/usb/pd.h>
> #include "rk3576.dtsi"
>
> / {
> @@ -334,6 +335,22 @@ &combphy1_psu {
> status = "okay";
> };
>
> +&dp {
> + status = "okay";
> +};
> +
> +&dp0_in {
> + dp0_in_vp1: endpoint {
> + remote-endpoint = <&vp1_out_dp>;
> + };
> +};
> +
> +&dp0_out {
> + dp0_out_con: endpoint {
> + remote-endpoint = <&usbdp_phy_dp_in>;
> + };
> +};
> +
> &gmac0 {
> clock_in_out = "output";
> phy-mode = "rgmii-rxid";
> @@ -772,6 +789,58 @@ regulator-state-mem {
> &i2c2 {
> status = "okay";
>
> + usbc0: typec-portc@4e {
> + compatible = "hynetek,husb311", "richtek,rt1711h";
> + reg = <0x4e>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&usbc0_int>;
> + vbus-supply = <&vbus5v0_typec>;
> +
> + connector {
> + compatible = "usb-c-connector";
> + label = "USB-C";
> + data-role = "dual";
> + power-role = "source";
> + source-pdos = <PDO_FIXED(5000, 2000,
> + PDO_FIXED_USB_COMM | PDO_FIXED_DATA_SWAP)>;
> +
> + altmodes {
> + displayport {
> + svid = /bits/ 16 <0xff01>;
> + vdo = <0x00001c46>;
> + };
> + };
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + usbc0_hs: endpoint {
> + remote-endpoint = <&usb_drd0_hs_ep>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + usbc0_ss: endpoint {
> + remote-endpoint = <&usbdp_phy_ss_out>;
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
> + usbc0_sbu: endpoint {
> + remote-endpoint = <&usbdp_phy_dp_out>;
> + };
> + };
> + };
> + };
> + };
> +
> hym8563: rtc@51 {
> compatible = "haoyu,hym8563";
> reg = <0x51>;
> @@ -944,6 +1013,14 @@ usb_otg0_pwren: usb-otg0-pwren {
> usbc0_int: usbc0-int {
> rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
> };
> +
> + usbc0_sbu1: usbc0-sbu1 {
> + rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + usbc0_sbu2: usbc0-sbu2 {
> + rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> };
>
> wifi {
> @@ -1008,7 +1085,6 @@ &u2phy0 {
> };
>
> &u2phy0_otg {
> - phy-supply = <&vbus5v0_typec>;
> status = "okay";
> };
>
> @@ -1051,13 +1127,74 @@ &ufshc {
> };
>
> &usbdp_phy {
> - rockchip,dp-lane-mux = <2 3>;
> + mode-switch;
> + orientation-switch;
> + pinctrl-names = "default";
> + pinctrl-0 = <&usbc0_sbu1 &usbc0_sbu2>;
> + sbu1-dc-gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
> + sbu2-dc-gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_HIGH>;
> status = "okay";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + usbdp_phy_ss_out: endpoint {
> + remote-endpoint = <&usbc0_ss>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + usbdp_phy_ss_in: endpoint {
> + remote-endpoint = <&usb_drd0_ss_ep>;
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
> +
> + usbdp_phy_dp_in: endpoint {
> + remote-endpoint = <&dp0_out_con>;
> + };
> + };
> +
> + port@3 {
> + reg = <3>;
> +
> + usbdp_phy_dp_out: endpoint {
> + remote-endpoint = <&usbc0_sbu>;
> + };
> + };
> + };
> };
>
> &usb_drd0_dwc3 {
> - dr_mode = "host";
> + usb-role-switch;
> status = "okay";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + usb_drd0_hs_ep: endpoint {
> + remote-endpoint = <&usbc0_hs>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + usb_drd0_ss_ep: endpoint {
> + remote-endpoint = <&usbdp_phy_ss_in>;
> + };
> + };
> + };
> };
>
> &usb_drd1_dwc3 {
> @@ -1079,3 +1216,10 @@ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
> remote-endpoint = <&hdmi_in_vp0>;
> };
> };
> +
> +&vp1 {
> + vp1_out_dp: endpoint@a {
> + reg = <ROCKCHIP_VOP2_EP_DP0>;
> + remote-endpoint = <&dp0_in_vp1>;
> + };
> +};
>
> ---
> base-commit: ddfe51b0a0f5dc9e415cc2c8ad8db17532dd426b
> change-id: 20261106-rk3576-evb1-husb311-00efcff4a808
>
> Best regards,
> --
> Alexey Charkov <alchark@xxxxxxxxxxx>
--
Best,
Chaoyi