Re: [PATCH v2 1/3] dt-bindings: display: panel: ilitek, ili9488: make the port optional

[Krzysztof Kozlowski]

On 11/11/2026 11:26, Icenowy Zheng wrote:
> 在 2026-11-10二的 13:00 +0100，Krzysztof Kozlowski写道：
>> On Mon, Nov 09, 2026 at 05:07:04PM +0100, Romain TISSERAND wrote:
>>> The panel is a MIPI-DSI peripheral, a child node of its DSI host,
>>> and the
>>> driver does not use a graph port. A port is only needed when the
>>> host
>>> links its panel through the graph; other DSI hosts, such as the
>>> Allwinner
>>> sun6i-a31-mipi-dsi one, link the child node and have no output port
>>> to
>>> point at. The PinePhone panel is described that way on the same
>>> host,
>>> without a port.
>>>
>>> Keep the port allowed (panel-common) but no longer required, as for
>>> other
>>> DSI panels such as ilitek,ili9881c.
>>
>> ilitek,ili7807s and a few others have the same and it is confusing.
>> The
>> port should be required when this is connected over SPI or I2C, but
>> not
>> for MIPI DSI. I think that for MIPI DSI port is meaningless so
>> actually
>> incorrect.
> 
> I found that the dw-mipi-dsi common code (e.g. on Rockchip SoCs with
> dw_mipi_dsi-rockchip) would expect the panel to be connected via a port
> even if it's the child node of the DSI controller.
> 
> Such an example is at arch/arm64/boot/dts/rockchip/rk3399-pinephone-
> pro.dts .
> 

Yes, the same for Qualcomm. So I actually wonder who needs the change here.

Best regards,
Krzysztof