[PATCH 0/2] ASoC: qcom: audioreach: fix S24_LE playback and route mixer disconnects
From: Marc Herrero via B4 Relay
Date: Wed Nov 11 2026 - 05:57:23 EST
Two AudioReach fixes found while bringing up 24-bit headphone playback
on the Radxa Dragon Q6A (QCS6490, sc8280xp machine driver, WCD9385).
Patch 1: S24_LE was described to the DSP as packed 3-byte samples, so
the ADSP audio_process crashed as soon as an S24_LE stream started.
Using the 32-bit container size makes S24_LE work.
Patch 2: writing 0 to any "<BE> Audio Mixer <FE>" route control cleared
the back end's link even if it belonged to another front end. As a
result alsactl restore lost DisplayPort on every boot, and the board's
UCM HDMI sequence disconnected the headphones (the PCM then stalls with
hw_ptr stuck at 0).
Both were tested on 7.2.9 with the board's topology changed to allow
S24_LE on MultiMedia1, and both apply to and build on asoc/for-next.
---
Marc Herrero (2):
ASoC: qcom: audioreach: use a 32-bit container for S24_LE PCM
ASoC: qcom: audioreach: only disconnect the route a mixer control owns
sound/soc/qcom/qdsp6/audioreach.c | 4 ++--
sound/soc/qcom/qdsp6/topology.c | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
---
base-commit: cde5523c75f1320a55ac1d55a717ccbb566557f0
change-id: 20261111-q6apm-fixes-21db1bb2d6a1
Best regards,
--
Marc Herrero <marcht@xxxxxxxxx>