Re: [PATCH v3 0/3] arm64: dts: allwinner: add A733/Cubie A7S support

[Enzo Adriano]

> [4] A733 8250_dw v2, patches 2-4:
> https://lore.kernel.org/r/cover.1792439398.git.vinicius.eduardo.pedrosa@xxxxxxxxx

Correction: the runtime dependency is patches 1-4, the complete posted v2
series. Patch 2/4 needs context introduced by 1/4, which is absent from
v7.4-rc1 and the checked tty-next and next-20261109 snapshots; all four
applied cleanly together.

AXP318W PMIC v8 5/5 also needs a context-only change on v7.4-rc1 from
sizeof(*desc) to sizeof(*new_desc), introduced by b53a09c957b68.
After IRQ-bank v3, pinctrl voltage-mode v3 needs its hunk context adjusted
to the IRQ-bank map; its voltage-mode change is unchanged.
The older clock helpers are already in v7.4-rc1; no other input adaptation
was needed, and DT v3 itself applied with ordinary git am.

> Untested: boot with pinctrl v3, card writes, hotplug, 1.8 V switching,

DT v3 with pinctrl v3 reached an initramfs shell on one Cubie A7S with
vendor firmware. In these boots, warm reboot returned to vendor Linux only
with bus-r-riscv and bus-r-msgbox marked critical (firmware-clock patch [5]).
No card-write, hotplug, 1.8 V switching or other functional coverage was
added, and no new schema check was run.

Thanks,
Enzo