Re: [PATCH v4] drm: shmobile: Fix white screen after resume when LCDC is stopped

From: Wolfram Sang

Date: Wed Nov 11 2026 - 07:16:55 EST


On Tue, Jul 07, 2026 at 04:30:04PM +0700, phucduc.bui@xxxxxxxxx wrote:
> From: bui duc phuc <phucduc.bui@xxxxxxxxx>
>
> The LCDC on R8A7740 may show a completely white screen after resuming
> from suspend (s2idle or s2ram).
>
> After resume, both Set A and Set B registers are reset to 0. As the
> Frame End interrupt is not generated while the controller is stopped
> (DO=0), the hardware register switching mechanism is not triggered.
> Consequently, Set A remains at 0x00000000 even though a valid Start
> Address is written to Set B, resulting in a white screen.
>
> This is a timing-dependent race condition. In some configurations,
> debug options slow down the resume path enough for a Frame End
> interrupt to occur, which can mask the issue.
>
> Fix this by priming both register sets with the Start Address while the
> controller is stopped, ensuring a valid base address is available
> immediately after resume.
>
> Tested-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> Signed-off-by: bui duc phuc <phucduc.bui@xxxxxxxxx>
> ---
>
> Note:
> It was originally posted in March and has already received both
> Reviewed-by and Tested-by tags. I'm resending it to bring it back
> to attention in case it was overlooked.
>
> Changes in v4:
> - No functional changes.
> - Resend.

Still not upstream? Who is the person to pick this up? This is a
valuable fix we surely want to have.