Re: [PATCH v3] pinctrl: sunxi: use automatic voltage detection on A733
From: Vinicius Pedrosa
Date: Wed Nov 11 2026 - 07:28:55 EST
On 11/9/26 21:11, Enzo Adriano wrote:
> Add BIAS_VOLTAGE_PIO_POW_AUTO to select auto (01) in every field of
> POW_MOD_SEL at controller init and skip per-pin voltage setup.
Tested-by: Vinicius Pedrosa <vinicius.eduardo.pedrosa@xxxxxxxxx> # Radxa Cubie A7Z
Tested with the posted prerequisites and my local board DT. POW_MOD_SEL
reads back 0x05555555 on the main PIO and 0x00055555 on R-PIO, and
UART0, MMC0 at 3.3 V, R-I2C0/PMIC and GPIO interrupts on eight main PIO
banks worked.